Print Page - My First Chunk Chunk

Title: My First Chunk Chunk
Post by: wretched on January 04, 2014, 11:53:03 AM

I finally finished my Chunk Chunk. The build was not difficult but making sure I had the right parts was a pain. I ended up needing 2 resistors to finish my Pastie Drive and a 3n3 cap to complete a SuckerPunch Over drive. So those will come soon.

Here she is. I had a loud squealing sound from the gain last night, but boxed it up and figured I would dial with that by lowering the volts to the j201s. After I got it together no more squeal. This pedal is HEAVY Metal at its finest. The Led is a Red with very high resistor so it looks a little like a burning ember
(http://i.imgur.com/wyq03Akl.jpg)
(http://i.imgur.com/k5TXfvRl.jpg)
(http://i.imgur.com/Rewtc69l.jpg)
(http://i.imgur.com/qP2wNqjl.jpg)

Title: Re: My First Chunk Chunk
Post by: jimilee on January 04, 2014, 01:16:54 PM

BRUTAL!!!! I've built a couple of them and they're just awesome.

Title: Re: My First Chunk Chunk
Post by: alanp on January 04, 2014, 02:14:06 PM

The chunk was my first high gain pedal :) Gnarly, brutal things.

Title: Re: My First Chunk Chunk
Post by: selfdestroyer on January 04, 2014, 04:13:29 PM

Very cool, I have yet to build one. Your off-board wiring looks nice and clean. Great build you go there.

Title: Re: My First Chunk Chunk
Post by: pickdropper on January 04, 2014, 04:36:13 PM

Very nice build.

It's a cool circuit. Definitely worth building.

Title: Re: My First Chunk Chunk
Post by: evildead222 on January 04, 2014, 07:24:48 PM

I gotta build one of these soon! My friend has the triple rectifier amp and it is awesome!

Title: Re: My First Chunk Chunk
Post by: wretched on January 06, 2014, 03:01:31 PM

Thanks guys. Here is a Chepo label Print out and clear tape :)

(http://i.imgur.com/SYvpMpIl.jpg)

madbeanpedals::forum

Projects => Build Reports => Topic started by: wretched on January 04, 2014, 11:53:03 AM