Title: Custom Guitar Project
Post by: jkokura on March 21, 2014, 07:22:07 PM
Post by: jkokura on March 21, 2014, 07:22:07 PM
I'm so excited! And I just can't hide it!
So, I'm having a Custom Tele body made up for me, and I thought I'd share the process and not just the finished guitar. I'm pretty stoked about this. I've done some guitar assemblies, but this is the first really custom piece I'm getting made just to my specs.
Anyway, the guitar maker I'm working with is a guy named Jason Banning, and you can find out info about his company here: http://www.banningguitars.com (http://www.banningguitars.com). He's willing to do pretty much anything, and his price was within my budget, so that really helped. He usually does Relic type jobs, which I asked him not to do on my guitar - I'd rather put the wear on the guitar myself, if you know what I mean!
The body is a 2 piece Mahogany with a boat route for the thinline style. I had him leave the bottom area unrolled, so it's just the sides that are routed. On top is a Maple cap that's nicely figured, but not extreme. Perhaps on a future guitar I'll get a 10 top, but for now it's just a nice maple top. That will get an F-Hole, and I'm not sure the hole will be standard, but we'll see. It'll be finished in a Blue Burst, which will likely really be awesome. I'm impressed with what Jason's finishes have looked like online, so I'm sure I'll love it.
The body will get a good set of custom stuff on it. I have a Marc Rutters bridge and custom Tele control plate. The control plate has the switch in between the volume and tone controls, and on a slant, which is a little more to my liking. On will go a Bigsby bridge, which I really like, and should balance this guitar out considering it's a thinline. The Rutters bridge has cutouts for the Bigsby already built in.
Pickups will be a set of Tom Andersons, who makes awesome hum cancelling pickups (I have TA's in another guitar now, and a set of hum buckers destined for another project). The bridge is a stacked single for a Tele bridge, and the neck will be a Mini-Bucker, which will be mounted to the body, not to a pick guard. I'm planning to go with no guard for this guitar, as I want the top to be as visible as possible.
The neck I'll use is a Warmoth Maple neck with Ebony fretboard. It'll have Gotoh Schaller style locking tuners on it. Currently I have both a Graphtec and a Bone nut on order to mount on the neck, so I'm not sure which I'll go with.
The only other mod I'm thinking of at this point is perhaps drilling out the Bigsby's Roller so I can quick mount the strings. We'll see.
Anyway, the next post will be all pics, and as I get more pictures to share, I'll add them.
Jacob
So, I'm having a Custom Tele body made up for me, and I thought I'd share the process and not just the finished guitar. I'm pretty stoked about this. I've done some guitar assemblies, but this is the first really custom piece I'm getting made just to my specs.
Anyway, the guitar maker I'm working with is a guy named Jason Banning, and you can find out info about his company here: http://www.banningguitars.com (http://www.banningguitars.com). He's willing to do pretty much anything, and his price was within my budget, so that really helped. He usually does Relic type jobs, which I asked him not to do on my guitar - I'd rather put the wear on the guitar myself, if you know what I mean!
The body is a 2 piece Mahogany with a boat route for the thinline style. I had him leave the bottom area unrolled, so it's just the sides that are routed. On top is a Maple cap that's nicely figured, but not extreme. Perhaps on a future guitar I'll get a 10 top, but for now it's just a nice maple top. That will get an F-Hole, and I'm not sure the hole will be standard, but we'll see. It'll be finished in a Blue Burst, which will likely really be awesome. I'm impressed with what Jason's finishes have looked like online, so I'm sure I'll love it.
The body will get a good set of custom stuff on it. I have a Marc Rutters bridge and custom Tele control plate. The control plate has the switch in between the volume and tone controls, and on a slant, which is a little more to my liking. On will go a Bigsby bridge, which I really like, and should balance this guitar out considering it's a thinline. The Rutters bridge has cutouts for the Bigsby already built in.
Pickups will be a set of Tom Andersons, who makes awesome hum cancelling pickups (I have TA's in another guitar now, and a set of hum buckers destined for another project). The bridge is a stacked single for a Tele bridge, and the neck will be a Mini-Bucker, which will be mounted to the body, not to a pick guard. I'm planning to go with no guard for this guitar, as I want the top to be as visible as possible.
The neck I'll use is a Warmoth Maple neck with Ebony fretboard. It'll have Gotoh Schaller style locking tuners on it. Currently I have both a Graphtec and a Bone nut on order to mount on the neck, so I'm not sure which I'll go with.
The only other mod I'm thinking of at this point is perhaps drilling out the Bigsby's Roller so I can quick mount the strings. We'll see.
Anyway, the next post will be all pics, and as I get more pictures to share, I'll add them.
Jacob
Title: Re: Custom Guitar Project
Post by: jkokura on March 21, 2014, 07:22:20 PM
Post by: jkokura on March 21, 2014, 07:22:20 PM
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele001.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele002.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele003.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele004.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele005.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele008.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele009.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele010.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele011.jpg.html)
(http://s1247.photobucket.com/user/jmkpedals/media/Guitars/Custom%20Banning%20Tele/BanningTele012.jpeg.html)Jacob
Title: Re: Custom Guitar Project
Post by: billstein on March 21, 2014, 07:30:06 PM
Post by: billstein on March 21, 2014, 07:30:06 PM
Nice. Looking forward to seeing the pics.
Title: Re: Custom Guitar Project
Post by: jkokura on March 21, 2014, 07:50:14 PM
Post by: jkokura on March 21, 2014, 07:50:14 PM
Quote from: billstein on March 21, 2014, 07:30:06 PM
Nice. Looking forward to seeing the pics.
Ask and thou shalt receive!
Jacob
Title: Re: Custom Guitar Project
Post by: gtr2 on March 21, 2014, 08:05:59 PM
Post by: gtr2 on March 21, 2014, 08:05:59 PM
Awesome, I fell in love at first site with the guitar on his home page ;D
Can't wait to see your finished guitar!
Josh
Can't wait to see your finished guitar!
Josh
Title: Re: Custom Guitar Project
Post by: jimilee on March 21, 2014, 08:18:02 PM
Post by: jimilee on March 21, 2014, 08:18:02 PM
Wow, I am very envious
Title: Re: Custom Guitar Project
Post by: Tremster on March 21, 2014, 08:22:00 PM
Post by: Tremster on March 21, 2014, 08:22:00 PM
Yes! Hollow Bigsby Tele FTW!!!
Edit: what neck profile does the Warmoth have? My main guitar, by far, is a Warmoth Tele I made in 2003. It has the big Boatneck on it and I find it hard to go back to thinner necks, that one is absolutely perfect for me, with huge frets.....
Edit: what neck profile does the Warmoth have? My main guitar, by far, is a Warmoth Tele I made in 2003. It has the big Boatneck on it and I find it hard to go back to thinner necks, that one is absolutely perfect for me, with huge frets.....
Title: Re: Custom Guitar Project
Post by: jkokura on March 21, 2014, 08:28:01 PM
Post by: jkokura on March 21, 2014, 08:28:01 PM
Quote from: gtr2 on March 21, 2014, 08:05:59 PM
Awesome, I fell in love at first site with the guitar on his home page ;D
Can't wait to see your finished guitar!
Josh
Which one - the Tele or the Hollow body?
Jacob
Title: Re: Custom Guitar Project
Post by: gtr2 on March 21, 2014, 11:53:19 PM
Post by: gtr2 on March 21, 2014, 11:53:19 PM
The tele with the P90's and bigsby. But, I like the relic look.
After browsing his site, I saw he'll do a LP Jr. style. That's a guitar I've always wanted, but I didn't like the recent Gibson versions. I'll have to keep him in mind.
Josh
After browsing his site, I saw he'll do a LP Jr. style. That's a guitar I've always wanted, but I didn't like the recent Gibson versions. I'll have to keep him in mind.
Josh
Title: Re: Custom Guitar Project
Post by: atreidesheir on March 22, 2014, 12:05:11 AM
Post by: atreidesheir on March 22, 2014, 12:05:11 AM
beautiful woods. nice routing. I am really impressed.
Title: Re: Custom Guitar Project
Post by: jubal81 on March 22, 2014, 12:07:19 AM
Post by: jubal81 on March 22, 2014, 12:07:19 AM
Wow, that's really exciting. Lookin' great!
Title: Re: Custom Guitar Project
Post by: thesameage on March 22, 2014, 12:18:25 AM
Post by: thesameage on March 22, 2014, 12:18:25 AM
Here's another take on the f-hole from a custom build that I had done from a great and very reasonable builder:
Title: Re: Custom Guitar Project
Post by: lincolnic on March 22, 2014, 02:51:41 AM
Post by: lincolnic on March 22, 2014, 02:51:41 AM
You guys are making this lefty jealous.
Title: Re: Custom Guitar Project
Post by: pickdropper on March 22, 2014, 05:46:18 AM
Post by: pickdropper on March 22, 2014, 05:46:18 AM
That looks beautiful, Jacob. I bet you'll be really happy with it.
Title: Re: Custom Guitar Project
Post by: LaceSensor on March 22, 2014, 10:41:20 AM
Post by: LaceSensor on March 22, 2014, 10:41:20 AM
Feels bad to add blasphemy, but goddamn... That's hot.
Title: Re: Custom Guitar Project
Post by: pedalhealer on March 22, 2014, 11:13:58 AM
Post by: pedalhealer on March 22, 2014, 11:13:58 AM
Nice, nice, nice! And strong verse from the Bible! ;)
Title: Re: Custom Guitar Project
Post by: Jabulani Jonny on March 22, 2014, 11:55:42 AM
Post by: Jabulani Jonny on March 22, 2014, 11:55:42 AM
"...but rather, decide never to put a stumbling block in the way of a brother." And now I'm jealous. ;D
Title: Re: Custom Guitar Project
Post by: gtr2 on March 22, 2014, 12:28:52 PM
Post by: gtr2 on March 22, 2014, 12:28:52 PM
Quote from: Jabulani Jonny on March 22, 2014, 11:55:42 AM
"...but rather, decide never to put a stumbling block in the way of a brother." And now I'm jealous. ;D
Funny :)
Yeah, now I'm jonesing for a LP Jr. body.
Title: Re: Custom Guitar Project
Post by: Leevibe on March 22, 2014, 02:26:36 PM
Post by: Leevibe on March 22, 2014, 02:26:36 PM
That is going to be one rad guitar Jacob! I would have a hard time sleeping with something like that in the works! Love the scripture too.
Title: Re: Custom Guitar Project
Post by: jkokura on March 22, 2014, 03:24:37 PM
Post by: jkokura on March 22, 2014, 03:24:37 PM
Quote from: gtr2 on March 22, 2014, 12:28:52 PMQuote from: Jabulani Jonny on March 22, 2014, 11:55:42 AM
"...but rather, decide never to put a stumbling block in the way of a brother." And now I'm jealous. ;D
Funny :)
Yeah, now I'm jonesing for a LP Jr. body.
An LP Jr Double Cut is actually my next project. Gonna have dual buckers and master volume/tone.
Jacob
Title: Re: Custom Guitar Project
Post by: jkokura on April 23, 2014, 11:06:42 PM
Post by: jkokura on April 23, 2014, 11:06:42 PM
Couple new pics added! It's being coloured now...
Jacob
Jacob
Title: Re: Custom Guitar Project
Post by: PhiloB on October 09, 2014, 03:42:49 PM
Post by: PhiloB on October 09, 2014, 03:42:49 PM
Stumbled across this post. Do you have finished photos or is it still in the works? Looks beautiful!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: Custom Guitar Project
Post by: jkokura on October 09, 2014, 03:59:54 PM
Post by: jkokura on October 09, 2014, 03:59:54 PM
I've had the body for months but I haven't gotten any work done on it recently. With my move happening this month, it's unlikely to be finished before that happens, but probably before Christmas I should have it done and playing. I'm pretty stoked. Here are the details on what the finished guitar will feature:
Body - Banning Custom Semi Hollow Tele (Mahogany with Maple Top, Nitro finish)
Neck - Warmoth Tele (Maple with Ebony fret board, nitro finish, graphtech nut, Standard thin profile)
Tuners - Gotoh Schaller style Locking
Bridge - Mark Rutters Steel plate with compensated barrels
Tremolo - Bigsby B5
Pickups - Tom Anderson M1 (neck) and TF1 (bridge)
There'll be no pick guard, so I'm hoping the rad body shows off well when loaded. I'm hoping that because of the Bigsby that the semi-hollow body balances well against the neck. We'll see.
Jacob
Body - Banning Custom Semi Hollow Tele (Mahogany with Maple Top, Nitro finish)
Neck - Warmoth Tele (Maple with Ebony fret board, nitro finish, graphtech nut, Standard thin profile)
Tuners - Gotoh Schaller style Locking
Bridge - Mark Rutters Steel plate with compensated barrels
Tremolo - Bigsby B5
Pickups - Tom Anderson M1 (neck) and TF1 (bridge)
There'll be no pick guard, so I'm hoping the rad body shows off well when loaded. I'm hoping that because of the Bigsby that the semi-hollow body balances well against the neck. We'll see.
Jacob
Title: Re: Custom Guitar Project
Post by: pickdropper on October 09, 2014, 04:21:11 PM
Post by: pickdropper on October 09, 2014, 04:21:11 PM
That's going to be AWESOME.
A semi-hollow tele with a Bigsby is on my want list.
A semi-hollow tele with a Bigsby is on my want list.
Title: Re: Custom Guitar Project
Post by: PhiloB on October 09, 2014, 04:43:51 PM
Post by: PhiloB on October 09, 2014, 04:43:51 PM
Sounds spectacular!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: Custom Guitar Project
Post by: gtr2 on October 09, 2014, 06:19:37 PM
Post by: gtr2 on October 09, 2014, 06:19:37 PM
Thats going to be awesome!!!