Ross compressor with wet/dry blend courtesy of Processaurus (who was very helpful and patient with me) http://www.diystompboxes.com/smfforum/index.php?topic=40292.0 and the janglebox mod on back.
(https://lh5.googleusercontent.com/_yFex0loOVcw/TZEvIjtNyKI/AAAAAAAAA7I/7YN8hs4bkDc/s640/IMG_0578.JPG)(https://lh4.googleusercontent.com/_yFex0loOVcw/TZEvMIG6asI/AAAAAAAAA7M/W4fiUlZAaPc/s400/IMG_0580.JPG)
Awesome! What a great idea, love to hear it action if you could post a clip... the DIY compressors I've heard aren't as subtle as I prefer, so having a mix control would be awesome
What is the switch on the bottom for? I have an original but it does not have a switch.
C
Quote from: nzCdog on March 28, 2011, 06:36:21 PM
Awesome! What a great idea, love to hear it action if you could post a clip... the DIY compressors I've heard aren't as subtle as I prefer, so having a mix control would be awesome
Sorry not setup for that right now.
Quote from: Om_Audio on March 28, 2011, 07:17:24 PM
What is the switch on the bottom for? I have an original but it does not have a switch.
C
Its the "Janglebox" mod meant to give that "Byrds" sound
What do you change for the janglebox mod? I have a Ross compressor that I have not boxed up yet. I might try it out.
I'm highly intrigued by the addition of the blend control and wonder if it's something I could add to my MXR Dyna Comp as a mod...
Quote from: crash on March 29, 2011, 05:06:59 PM
What do you change for the janglebox mod? I have a Ross compressor that I have not boxed up yet. I might try it out.
lifts the .001uf cap parallel to the 150k resistor at the output of the 3080
Quote from: pauloman80 on March 30, 2011, 05:00:22 AM
I'm highly intrigued by the addition of the blend control and wonder if it's something I could add to my MXR Dyna Comp as a mod...
check out the barber tone press. as I understand it (keep in mind my understanding is limited) the barber is a Ross comp clone with a blend knob
I like the Cars themed logo!
Quote from: gtr2 on March 30, 2011, 08:26:53 AM
I like the Cars themed logo!
very good eye ;) it is in fact a photoshoped cars logo ;D
Yeah, unfortunately I've seen that movie more than I care to mention... :D
did you use a specific layout that incorporated the janglebox switch?
Quote from: irmcdermott on April 03, 2011, 03:03:59 PM
did you use a specific layout that incorporated the janglebox switch?
no two different boards joined at ground.
This would be a great version of Ross comp to have a Madbean board on the projects page (with blend control and jangle switch mod)! Yaya! ;D