madbeanpedals::forum

General => Open Discussion => Topic started by: jimilee on June 28, 2014, 05:36:32 PM

Title: Kwawk wah
Post by: jimilee on June 28, 2014, 05:36:32 PM
Anyone build one? Which trannies did you use?
Title: Re: Kwawk wah
Post by: GrindCustoms on June 28, 2014, 05:39:29 PM
2N5088
MPSA18
BC109C
BC550
BC549C
2N3904

All of those will work, depends of the amount of gain, volume, dirt you want.
Title: Re: Kwawk wah
Post by: GermanCdn on June 28, 2014, 06:15:16 PM
I've got one built up, going to throw it in a box with a Green Bean.
Title: Re: Kwawk wah
Post by: jimilee on June 28, 2014, 06:38:53 PM

Quote from: GermanCdn on June 28, 2014, 06:15:16 PM
I've got one built up, going to throw it in a box with a Green Bean.
Mines going into a cb-95 enclosure because the other 3 wahs I built aren't enough.
Title: Re: Kwawk wah
Post by: jimilee on July 11, 2014, 11:09:55 PM
I used a 2n5088 and a bc549 I got a lot of squealing with 2 2n5088. Sounds pretty good now, unless I add the extra caps, then it squeals again.