Title: Supermoon Reverb, Accutronics BTDR-2 digital reverb
Post by: (DEAD)fx on July 10, 2014, 12:35:11 AM
Post by: (DEAD)fx on July 10, 2014, 12:35:11 AM
here's another recent build I actually completed before the fuzz factory clone. Using the d-verb vero board layout here, http://www.sabrotone.com/?attachment_id=17 (http://www.sabrotone.com/?attachment_id=17), this one's a digital reverb based around the Accutronics BTDR-2 reverb brick with a medium decay time. Unfortunately I didn't realize/hadn't heard of the Mr. Black line of pedals and his Supermoon Reverb so sorry for the confusion but this is not a clone or rip-off of his, just coincidentally used the same name for a reverb since I built it right after the last supermoon this year.
Title: Re: Supermoon Reverb, Accutronics BTDR-2 digital reverb
Post by: selfdestroyer on July 10, 2014, 07:45:24 AM
Post by: selfdestroyer on July 10, 2014, 07:45:24 AM
My jealousy for laser etching is getting too big to contain! I love this build, the artwork is perfect and that blue color you used is excellent. For a Vero layout you sure kept all the wiring clean and in place. Great job.
Cody
Cody
Title: Re: Supermoon Reverb, Accutronics BTDR-2 digital reverb
Post by: Alaboogie on July 10, 2014, 10:19:20 PM
Post by: Alaboogie on July 10, 2014, 10:19:20 PM
seriously nice guts man and ditto on the laser etching...i am jealous!
Title: Re: Supermoon Reverb, Accutronics BTDR-2 digital reverb
Post by: lars on July 10, 2014, 11:17:58 PM
Post by: lars on July 10, 2014, 11:17:58 PM
Impressive. Most impressive. +1 on keeping a vero layout that clean. That LED is pretty unique, where did you source that?
Title: Re: Supermoon Reverb, Accutronics BTDR-2 digital reverb
Post by: (DEAD)fx on July 11, 2014, 03:50:55 PM
Post by: (DEAD)fx on July 11, 2014, 03:50:55 PM
the LED is from Banzai music, they make these conical molded LEDs that they call their Rocket LED, they look awesome on the right pedal.