Title: OftenFX Supreaux Deux
Post by: selfdestroyer on July 20, 2014, 10:53:36 AM
Post by: selfdestroyer on July 20, 2014, 10:53:36 AM
I have been sitting on this PCB that I populated months ago and really wanted to get it boxed up. I did a basic reverse etch with the always loved Supro logo and slapped it together. This thing makes my Riviera sound so mean through my Twin Reverb, I love it.
Top Shot:
Gut Shot:
Top Shot:
Gut Shot:
Title: Re: OftenFX Supreaux Deux
Post by: Thomas_H on July 20, 2014, 10:55:43 AM
Post by: Thomas_H on July 20, 2014, 10:55:43 AM
Thats a cool etch and build!
Especially like the flash ;)
Especially like the flash ;)
Title: Re: OftenFX Supreaux Deux
Post by: Leevibe on July 20, 2014, 01:26:56 PM
Post by: Leevibe on July 20, 2014, 01:26:56 PM
That is a drop-dead-gorgeous etch my friend
Title: Re: OftenFX Supreaux Deux
Post by: pickdropper on July 20, 2014, 01:48:25 PM
Post by: pickdropper on July 20, 2014, 01:48:25 PM
Man, you are an etching stud. The are getting so clean.
Title: Re: OftenFX Supreaux Deux
Post by: chordball on July 20, 2014, 02:43:03 PM
Post by: chordball on July 20, 2014, 02:43:03 PM
That's beautiful! I'm jealous of your etching skills.
Title: Re: OftenFX Supreaux Deux
Post by: Gledison on July 20, 2014, 03:18:29 PM
Post by: Gledison on July 20, 2014, 03:18:29 PM
Niiiiiice etch mate!
how did you finish the dark part?
Great job!
how did you finish the dark part?
Great job!
Title: Re: OftenFX Supreaux Deux
Post by: PhiloB on July 20, 2014, 05:58:15 PM
Post by: PhiloB on July 20, 2014, 05:58:15 PM
It is so clean. I assumed it was laser etched.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: OftenFX Supreaux Deux
Post by: selfdestroyer on July 21, 2014, 12:33:08 AM
Post by: selfdestroyer on July 21, 2014, 12:33:08 AM
Thanks everyone.
Nope, just good ol laserjet transfer etch. My process is in my signature.
Cody
Quote from: Gledison on July 20, 2014, 03:18:29 PMIts a reverse etch, so the silver parts are higher than the painted area.
Niiiiiice etch mate!
how did you finish the dark part?
Great job!
Quote from: PhiloB on July 20, 2014, 05:58:15 PM
It is so clean. I assumed it was laser etched.
Sent from my iPhone using Tapatalk
Nope, just good ol laserjet transfer etch. My process is in my signature.
Cody
Title: Re: OftenFX Supreaux Deux
Post by: GrindCustoms on July 25, 2014, 05:04:59 PM
Post by: GrindCustoms on July 25, 2014, 05:04:59 PM
Might have to look into getting an enclosure etched by you if you'd be down for it, most impressive stuff all the time! 8)
Title: Re: OftenFX Supreaux Deux
Post by: selfdestroyer on July 25, 2014, 07:00:05 PM
Post by: selfdestroyer on July 25, 2014, 07:00:05 PM
Quote from: GrindCustoms on July 25, 2014, 05:04:59 PM
Might have to look into getting an enclosure etched by you if you'd be down for it, most impressive stuff all the time! 8)
I feel so bad since I still need to do at 125B for Jacob (JMK) but the 125B's I got just don't etch the same. I still need to buy a few from other sources to test. Timbo gave me some ideas to try also.
My bench time is so erratic that I hate committing to things that I have a hard time delivering. But.. when it slows down at home and work I will be building like crazy and would love to etch some enclosures for members.
Cody
Title: Re: OftenFX Supreaux Deux
Post by: Blues Healer on July 25, 2014, 08:09:43 PM
Post by: Blues Healer on July 25, 2014, 08:09:43 PM
I have a question about the Supreaux:
I was looking at the ROG project just before this was posted, and I thought it recommended using a 15-18v supply for best results.
Is that correct? 'Cause it doesn't look like there is an upgraded supply in this build.
I just wonder because that kinda turned me off to building one, since there are so many great overdrives without the added parts.
I was looking at the ROG project just before this was posted, and I thought it recommended using a 15-18v supply for best results.
Is that correct? 'Cause it doesn't look like there is an upgraded supply in this build.
I just wonder because that kinda turned me off to building one, since there are so many great overdrives without the added parts.
Title: Re: OftenFX Supreaux Deux
Post by: GrindCustoms on July 25, 2014, 08:13:11 PM
Post by: GrindCustoms on July 25, 2014, 08:13:11 PM
Quote from: Blues Healer on July 25, 2014, 08:09:43 PM
I have a question about the Supreaux:
I was looking at the ROG project just before this was posted, and I thought it recommended using a 15-18v supply for best results.
Is that correct? 'Cause it doesn't look like there is an upgraded supply in this build.
I just wonder because that kinda turned me off to building one, since there are so many great overdrives without the added parts.
There's an on-board charge pump for 18V.
Quote from: selfdestroyer on July 25, 2014, 07:00:05 PMQuote from: GrindCustoms on July 25, 2014, 05:04:59 PM
Might have to look into getting an enclosure etched by you if you'd be down for it, most impressive stuff all the time! 8)
I feel so bad since I still need to do at 125B for Jacob (JMK) but the 125B's I got just don't etch the same. I still need to buy a few from other sources to test. Timbo gave me some ideas to try also.
My bench time is so erratic that I hate committing to things that I have a hard time delivering. But.. when it slows down at home and work I will be building like crazy and would love to etch some enclosures for members.
Cody
When you feel like you are ready to get into it, shoot me a PM :)
Title: Re: OftenFX Supreaux Deux
Post by: lars on July 25, 2014, 10:58:13 PM
Post by: lars on July 25, 2014, 10:58:13 PM
Excellent build, so clean inside and out! Nice green shag carpet too...