Title: Neon Kard Table (K.L.O.N.E)
Post by: rullywowr on August 22, 2014, 03:21:18 PM
Post by: rullywowr on August 22, 2014, 03:21:18 PM
Yup, another K.L.O.N.E. 1n270 diodes (um, these ARE essential), Neutrik Jacks, Panasonic ECQ-V caps. TI Opamps. Installed the 8n2 instead of the 3n9 cap in the toan section. Powdercoated in neon pink and laser etched by me. 3mm flat top clear white LED.
Layout is called..."Kard Table". I am fairly satisfied with this layout, however going to do some tweaking to allow for even easier assembly... tweak tweak tweak (lather, rinse, repeat)
The pics don't really capture just how blindingly bright this neon powder coat is but here we go:
Layout is called..."Kard Table". I am fairly satisfied with this layout, however going to do some tweaking to allow for even easier assembly... tweak tweak tweak (lather, rinse, repeat)
The pics don't really capture just how blindingly bright this neon powder coat is but here we go:
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: juansolo on August 22, 2014, 03:24:37 PM
Post by: juansolo on August 22, 2014, 03:24:37 PM
Full of Win.
Did you try swapping the toan (I blame Rej for the fact I spell it like that now) resistors and going with the 3n9 or do you prefer them the 'wrong' way with the 8n2?
I really should build one to compare/contrast but I find myself really not being arsed ;)
Did you try swapping the toan (I blame Rej for the fact I spell it like that now) resistors and going with the 3n9 or do you prefer them the 'wrong' way with the 8n2?
I really should build one to compare/contrast but I find myself really not being arsed ;)
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: GermanCdn on August 22, 2014, 03:30:38 PM
Post by: GermanCdn on August 22, 2014, 03:30:38 PM
Love the etch, but that colour is just way over the top. Nice job Ben. Think the next Klone I build I'll put the tone caps on a switch for shits and giggles.
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: rullywowr on August 22, 2014, 03:34:07 PM
Post by: rullywowr on August 22, 2014, 03:34:07 PM
Quote from: juansolo on August 22, 2014, 03:24:37 PM
Full of Win.
Did you try swapping the toan (I blame Rej for the fact I spell it like that now) resistors and going with the 3n9 or do you prefer them the 'wrong' way with the 8n2?
I really should build one to compare/contrast but I find myself really not being arsed ;)
Thanks guys. So, for my enlightenment which is the "correct" values for the Toan section? I always thought the 8n2 was the correct value instead of the 3n9? Hmm.
Here is the section from my schematic.
You are saying the R21 (100k) and the R20 (4k7) should be swapped?
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: Leevibe on August 22, 2014, 03:35:30 PM
Post by: Leevibe on August 22, 2014, 03:35:30 PM
Love the name and that etch looks uber perfect.
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: muddyfox on August 22, 2014, 03:39:49 PM
Post by: muddyfox on August 22, 2014, 03:39:49 PM
Exactly how much less manly does the fact that I love that color on the pedal makes me? 8)
Also, much love for the notations on the board and that etch is just so sharp! Great stuff, Ben!
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: juansolo on August 22, 2014, 04:14:36 PM
Post by: juansolo on August 22, 2014, 04:14:36 PM
Quote from: rullywowr on August 22, 2014, 03:34:07 PMQuote from: juansolo on August 22, 2014, 03:24:37 PM
Full of Win.
Did you try swapping the toan (I blame Rej for the fact I spell it like that now) resistors and going with the 3n9 or do you prefer them the 'wrong' way with the 8n2?
I really should build one to compare/contrast but I find myself really not being arsed ;)
Thanks guys. So, for my enlightenment which is the "correct" values for the Toan section? I always thought the 8n2 was the correct value instead of the 3n9? Hmm.
Here is the section from my schematic.
You are saying the R21 (100k) and the R20 (4k7) should be swapped?
From the Klone science thread, R19 and R20 are the wrong way around. Those swapped with the 3n9 is allegedly the correct way of doing things. However leaving them be and fitting an 8n2 offers an alternative solution. I haven't tried it yet, so am only speaking from what I've read ( I've always fitted an 8n2, indeed I think we might have been responsible for that one ;) ).
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: jubal81 on August 22, 2014, 06:02:57 PM
Post by: jubal81 on August 22, 2014, 06:02:57 PM
Well now, that's just all kinds of cool. 8)
Although you might hear form a lawyer, since I'm pretty sure "These are essential" is trademarked under the 'Dickish snark' provision of the 1998 copyright protection act.
Although you might hear form a lawyer, since I'm pretty sure "These are essential" is trademarked under the 'Dickish snark' provision of the 1998 copyright protection act.
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: pickdropper on August 22, 2014, 06:09:24 PM
Post by: pickdropper on August 22, 2014, 06:09:24 PM
I suspect this is a really nice build. It looked really nice for the couple of seconds I saw it before the blinding pink enclosure burned out my retinas.
/ hopes there are no spelling errors in post.
/ hopes there are no spelling errors in post.
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: bcalla on August 22, 2014, 06:27:23 PM
Post by: bcalla on August 22, 2014, 06:27:23 PM
Looks great. Funny, I'm building a pink pedal now for a singer I work with. It is just a little intense.
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: Blues Healer on August 22, 2014, 06:37:34 PM
Post by: Blues Healer on August 22, 2014, 06:37:34 PM
I love the graphics, Ben.
... and c'mon guys! If he called it "Pu$$y Pink", you'd be all over it! :D
I'm guessing that you got more than one board?
... and c'mon guys! If he called it "Pu$$y Pink", you'd be all over it! :D
I'm guessing that you got more than one board?
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: cooder on August 22, 2014, 07:04:13 PM
Post by: cooder on August 22, 2014, 07:04:13 PM
Are you trying to entice the teenage girlie market segment and pull them over the cardtable with this colour scheme? ;)
Sweet build amd layout, Ben!
Sweet build amd layout, Ben!
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: jimilee on August 22, 2014, 08:36:08 PM
Post by: jimilee on August 22, 2014, 08:36:08 PM
That's kick add!! Every time I build a klone, somebody buys it up. I gotta build another one and not post it anywhere. I love the layout!!
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: PhiloB on August 22, 2014, 09:12:38 PM
Post by: PhiloB on August 22, 2014, 09:12:38 PM
Board mounted pots in a 1590bb FTW. Looks great. Being color blind the pink doesn't offend me at all;)
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: selfdestroyer on August 23, 2014, 01:25:22 AM
Post by: selfdestroyer on August 23, 2014, 01:25:22 AM
A pink klon with a card table on it, what's not to love about that. Had me giggling. These boards going to be available at some point? Looks like a nice straight forward build. Also, that laser etching cable out spot on.. one day I will have one.. one day.
Cody
Cody
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: wgc on August 23, 2014, 02:53:42 AM
Post by: wgc on August 23, 2014, 02:53:42 AM
That's hot. Great layout
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: lincolnic on August 24, 2014, 03:42:19 AM
Post by: lincolnic on August 24, 2014, 03:42:19 AM
Super quality build. As someone who also just made a pink build...right on.
Title: Re: Neon Kard Table (K.L.O.N.E)
Post by: rullywowr on August 24, 2014, 03:43:23 AM
Post by: rullywowr on August 24, 2014, 03:43:23 AM
I think it needs a glitter rainbow sticker on the front.