Print Page - Line Level > Instrument Level

Title: Line Level > Instrument Level > Line Level ....Solution?
Post by: peAk on October 02, 2014, 11:32:52 AM

Hi all,

Trying to finish up some stuff in my home studio and one thing that has got me pretty frustrated is patching in pedals to a patchbay.

What's the easiest and cheapest way to go from a line level, to an instrument level, back to a line level?

I am using an effect loop straight from my DAW and I can't seem to get this working right. I want to be able to experiment with pedal effects on already recorded tracks and not necessarily guitar tracks.

Any advice would be greatly appreciated!

Title: Re: Line Level > Instrument Level > Line Level ....Solution?
Post by: peterc on October 02, 2014, 12:21:00 PM

Peak

Here is a simplified version of the infamous 'Reamp'....

http://groupdiy.com/index.php?topic=1024.msg403691#msg403691

Peter

Title: Re: Line Level > Instrument Level > Line Level ....Solution?
Post by: lincolnic on October 03, 2014, 04:10:20 AM

This is probably what you're looking for: http://store.diyrecordingequipment.com/line2amp-passive-re-amplifier-kit/

Title: Re: Line Level > Instrument Level > Line Level ....Solution?
Post by: raulduke on October 03, 2014, 10:37:05 AM

These will also work well for your application:

http://www.muzique.com/tech/opamp_multi.htm (http://www.muzique.com/tech/opamp_multi.htm)

I built a DI using the project and it works great.

AMZ is a great website!

Title: Re: Line Level > Instrument Level > Line Level ....Solution?
Post by: oldhousescott on October 03, 2014, 02:59:42 PM

Ebtech Line Level Shifter (http://www.sweetwater.com/store/detail/LLS2/)

You get the level shift, plus galvanic isolation to eliminate noise. Great little problem solvers.

madbeanpedals::forum

General => Open Discussion => Topic started by: peAk on October 02, 2014, 11:32:52 AM