This is my first build report on this forum!
Introducing my Slow Loris :
(http://i1277.photobucket.com/albums/y490/Willyboy2101/IMG_20141020_213434_zps09a8f632.jpg)
(http://i1277.photobucket.com/albums/y490/Willyboy2101/IMG_20141020_213509_zps85c05ccd.jpg)
I redesigned the PCB myself with DipTrace with the components and potentiometers where i wanted them to be. Here's a pic to give you an idea what this looks like inside :
(http://i1277.photobucket.com/albums/y490/Willyboy2101/IMG_20140928_161806_zps15620882.jpg)
The schematics of the PCB is the same as the Slow Loris (except a slight modification on the DC filter). Like i said, i only redesigned the PCB my own way.
Being in an appartment, i can really krank up my amp to give it a real test, but from what i heard, the Si/LED switch as well as the CUT control really gives a lot of variations in the grain and the characteristics of the distortion.
Looks good, man.
Great job! 8)
Nice job! Very well done. I like your graphic a lot and you did a nice job on that board. Hope to see some more from you.
looks fantastic :) always wanted to try a rat :)
i see have to work more on the printings ;)