Title: Slow Loris home made PCB
Post by: willyboy on October 21, 2014, 02:25:31 AM
Post by: willyboy on October 21, 2014, 02:25:31 AM
This is my first build report on this forum!
Introducing my Slow Loris :
I redesigned the PCB myself with DipTrace with the components and potentiometers where i wanted them to be. Here's a pic to give you an idea what this looks like inside :
The schematics of the PCB is the same as the Slow Loris (except a slight modification on the DC filter). Like i said, i only redesigned the PCB my own way.
Being in an appartment, i can really krank up my amp to give it a real test, but from what i heard, the Si/LED switch as well as the CUT control really gives a lot of variations in the grain and the characteristics of the distortion.
Introducing my Slow Loris :
I redesigned the PCB myself with DipTrace with the components and potentiometers where i wanted them to be. Here's a pic to give you an idea what this looks like inside :
The schematics of the PCB is the same as the Slow Loris (except a slight modification on the DC filter). Like i said, i only redesigned the PCB my own way.
Being in an appartment, i can really krank up my amp to give it a real test, but from what i heard, the Si/LED switch as well as the CUT control really gives a lot of variations in the grain and the characteristics of the distortion.
Title: Re: Slow Loris home made PCB
Post by: chuckbuick on October 21, 2014, 04:55:56 AM
Post by: chuckbuick on October 21, 2014, 04:55:56 AM
Looks good, man.
Title: Re: Slow Loris home made PCB
Post by: cooder on October 21, 2014, 06:34:04 AM
Post by: cooder on October 21, 2014, 06:34:04 AM
Great job! 8)
Title: Re: Slow Loris home made PCB
Post by: Leevibe on October 21, 2014, 01:01:02 PM
Post by: Leevibe on October 21, 2014, 01:01:02 PM
Nice job! Very well done. I like your graphic a lot and you did a nice job on that board. Hope to see some more from you.
Title: Re: Slow Loris home made PCB
Post by: luks999 on October 23, 2014, 08:07:29 AM
Post by: luks999 on October 23, 2014, 08:07:29 AM
looks fantastic :) always wanted to try a rat :)
i see have to work more on the printings ;)
i see have to work more on the printings ;)