Print Page - Current lover build issue

Title: Current lover build issue
Post by: hozy31 on December 13, 2014, 04:31:37 PM

Hi all,

New to forum so apologies if posting in wrong place.

I have an issue with my Current Lover build i get some noise coming through but before long R33 started to burn out. Any ideas why? Help would be much appreciated.

Title: Re: Current lover build issue
Post by: lars on December 13, 2014, 10:12:24 PM

How are you supplying power/ what voltage? Which BBD chip did you use?

Title: Re: Current lover build issue
Post by: madbean on December 13, 2014, 10:41:19 PM

Try either increasing R33 to 47R or jumper it out altogether. That should solve the problem.

Title: Re: Current lover build issue
Post by: hozy31 on December 14, 2014, 02:23:28 PM

I am using the MN3207 BBD chip and 9v 500mA power supply. I will have a go at jumpering out all together and see if that helps. Out of 13 builds this is the first problem i have encountered so overall feel quite happy. Thanks for response guys.

madbeanpedals::forum

General => Open Discussion => Topic started by: hozy31 on December 13, 2014, 04:31:37 PM