Print Page - Kingslayer 2 question

Title: Kingslayer 2 question
Post by: dannoceti on January 10, 2015, 04:00:21 PM

I'm short (2) 1uf film caps for the kingslayer, just an oversight when ordering.

Could I substitute with a nonpolarized electro? I went to Frys and the film 1uf's they had were 200+ volts and massive so I grabbed some nonpolarized electros, but don't want to use them if it will affect the quality of the circuit (http://tapatalk.imageshack.com/v2/15/01/10/0ab5ef198ef06aa11d4649e7ee8db0c9.jpg)

Sent from my iPhone using Tapatalk

Title: Re: Kingslayer 2 question
Post by: midwayfair on January 10, 2015, 08:00:58 PM

You can always substitute a non-polarized cap for a polarized one. The reverse is not true.

Title: Re: Kingslayer 2 question
Post by: dannoceti on January 10, 2015, 09:37:46 PM

Thanks for the reply! What about swapping film for electro?

Sent from my iPhone using Tapatalk

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: dannoceti on January 10, 2015, 04:00:21 PM