I will be doing a short run of Laserwolf PCB's that will ship the first week of March. These are available for pre-order in the store now. The prices are $17 - $21 shipped. International & Canada will require 1st Class shipping rather than Flats so they are more expensive, I'm afraid. The base price for the board itself is $15 (it is rather big).
Anyway, there will be about 20 boards available. The few small issues and work-arounds from the first run have all been corrected.
I would like one.
already buy mine
Quote from: madbean on February 13, 2015, 10:02:03 AM
I will be doing a short run of Laserwolf PCB's that will ship the first week of March. These are available for pre-order in the store now. The prices are $17 - $21 shipped. International & Canada will require 1st Class shipping rather than Flats so they are more expensive, I'm afraid. The base price for the board itself is $15 (it is rather big).
Anyway, there will be about 20 boards available. The few small issues and work-arounds from the first run have all been corrected.
Brian where can we source the J112??
Bought mine also! 8)
Quote from: copachino on February 13, 2015, 11:17:35 AM
Quote from: madbean on February 13, 2015, 10:02:03 AM
I will be doing a short run of Laserwolf PCB's that will ship the first week of March. These are available for pre-order in the store now. The prices are $17 - $21 shipped. International & Canada will require 1st Class shipping rather than Flats so they are more expensive, I'm afraid. The base price for the board itself is $15 (it is rather big).
Anyway, there will be about 20 boards available. The few small issues and work-arounds from the first run have all been corrected.
Brian where can we source the J112??
Believe it or not, Mouser carries that one. It appears to still be in production. I would assume overseas parts houses would have it as well (not sure, though).
Is there going to be a restock on the dirtbaby and moodring? I see they are both running low. I'm not worried about timetable I just need to be reassured that I will be able to get them in the future :o
I've been waiting for this board for weeks. Looks like I missed it. :-\
Steve
Quote from: TGP39 on February 13, 2015, 12:48:42 PM
I've been waiting for this board for weeks. Looks like I missed it. :-\
Steve
Hold on Steve. I think we had one messed up transaction. I will look into it and verify the numbers. I think I can arrange a board for you.
Quote from: Luke51411 on February 13, 2015, 12:30:42 PM
Is there going to be a restock on the dirtbaby and moodring? I see they are both running low. I'm not worried about timetable I just need to be reassured that I will be able to get them in the future :o
Yes, of course. Not sure if that will be in early or late March batch, though. All the Asian board makers are now on the New Year holiday so things are taking longer anyway. I will update the Moodring and Dirtbaby once they are sold out.
Quote from: madbean on February 13, 2015, 01:31:40 PM
Quote from: Luke51411 on February 13, 2015, 12:30:42 PM
Is there going to be a restock on the dirtbaby and moodring? I see they are both running low. I'm not worried about timetable I just need to be reassured that I will be able to get them in the future :o
Yes, of course. Not sure if that will be in early or late March batch, though. All the Asian board makers are now on the New Year holiday so things are taking longer anyway. I will update the Moodring and Dirtbaby once they are sold out.
Ok good, I don't have the money right now and the boards I have are being built for someone else. Thanks.
Quote from: madbean on February 13, 2015, 01:30:16 PM
Quote from: TGP39 on February 13, 2015, 12:48:42 PM
I've been waiting for this board for weeks. Looks like I missed it. :-\
Steve
Hold on Steve. I think we had one messed up transaction. I will look into it and verify the numbers. I think I can arrange a board for you.
Fingers crossed...it's funny, I said this morning that I shouldn't wait and I pulled the trigger on all my other boards. If I have to wait longer it's no biggie. Congrats to all you lucky scoundrels. :)
Steve.
What's a laser wolf, I missed it and can't find it on the forum, mainly because I am out of town with only my iPhone.
Quote from: jimilee on February 13, 2015, 02:32:03 PM
What's a laser wolf, I missed it and can't find it on the forum, mainly because I am out of town with only my iPhone.
It's the Eddie Van Halen in a box. Triple effects on one pcb that Brian entered in the last contest. It's a beaut!
Steve.
Quote from: jimilee on February 13, 2015, 02:32:03 PM
What's a laser wolf, I missed it and can't find it on the forum, mainly because I am out of town with only my iPhone.
http://www.madbeanpedals.com/forum/index.php?topic=18134.msg178699#msg178699
Daaaaammmnnn
Just ordered this PCB...
Looks to be a saaaaWEEET build!
Thanks Brian!
I will investigate more about the J112 and see if I can do a more available alternate. IIRC, I did try a 2n5457 but the results were better with the J112. But, it's not a huge deal...we are just talking about an LFO indicator light here.
So sweet about the Laserwolf! I hope my order went through *cross fingers*
What was the surf-rock one that was up there? I was looking forward to that one, but I already forgot what the name was again.
Any chance of a separate release of the OD section? It sounds quite interesting on its own.
Quote from: Muadzin on February 14, 2015, 05:42:29 PM
Any chance of a separate release of the OD section? It sounds quite interesting on its own.
I had not really thought about it, but if there is enough interest, sure. It would be very easy and quick to do a project for the OD section...perhaps with some tweaks for more gain, too.
Sweet! 8)
I'm quite sure that having a nice 'marshall in a box' type of pcb would be a great addition to the catalog.
I'd buy it (i know theres the 8 balls, but it's such an old design that i can't help but think that we can have better amp in a box type of pedals designs today).
There's enough cross-over with the supposed "Peacekeeper" fet project I was working on that this could just become the PK project.
I took a stab at the layout, added a MIDs trimmer plus a couple other small mods. I'll see about prototyping it in the near future.
Just noticed the Laserwolf pre-order and it's sold out. Any plans for more?
Quote from: strat68 on February 20, 2015, 05:10:51 AM
Just noticed the Laserwolf pre-order and it's sold out. Any plans for more?
I will do these in batches every couple of months or so. So, there will be another in April or May. I will announce it further ahead next time around.
I just got an update on this from the manufacturer: I should have the LW boards in hand on Tuesday March 10th. Everything is pushed back a bit because of the Chinese new year so of course all our manufacturers in Asia are on holiday.
hoping to catch this one next time around!
yeahh, me too...please inform for new pre-order!
cheers raffa
I will have a sign up sheet in advance of the next order (I'll make it available around the middle of March). This will let everyone sign up for one so I know how many to order. IOW...no one will miss out on the next one, I promise!
You are the greatest Brian.
Quote from: madbean on March 02, 2015, 06:40:40 AM
I will have a sign up sheet in advance of the next order (I'll make it available around the middle of March). This will let everyone sign up for one so I know how many to order. IOW...no one will miss out on the next one, I promise!
cheers brian,
...by the way...i'm using your stuff a couple of years now...and this one is my second post ;D ;D i would like to say thank you your effort and your work here...i really apreciate it!
thanks man cheers from switzerland!
raffa
Quote from: madbean on March 02, 2015, 06:40:40 AM
I will have a sign up sheet in advance of the next order (I'll make it available around the middle of March). This will let everyone sign up for one so I know how many to order. IOW...no one will miss out on the next one, I promise!
Wait so is the the sign up sheet or the order happening in the middle of this month?
Sent from my iPhone using Tapatalk
I will post the sign up in the middle of March. The actual order will take place in April and be available probably the last week of April.
Quote from: madbean on March 02, 2015, 08:27:36 AM
I will post the sign up in the middle of March. The actual order will take place in April and be available probably the last week of April.
Thanks, I'm a bassist, you'll have to speak slowly....
Sent from my iPhone using Tapatalk
Quote from: jimilee on March 02, 2015, 08:46:34 AM
Quote from: madbean on March 02, 2015, 08:27:36 AM
I will post the sign up in the middle of March. The actual order will take place in April and be available probably the last week of April.
Thanks, I'm a bassist, you'll have to speak slowly....
Sent from my iPhone using Tapatalk
LOL, classic Jimi.
Cody
The new Laserwolf boards have all shipped and the project doc has been updated for this run.
http://www.madbeanpedals.com/projects/Laserwolf/Laserwolf_2015.pdf
There are no significant changes other than fixing the couple of mistakes that were on the proto boards.
Quote from: madbean on March 12, 2015, 03:38:32 PM
The new Laserwolf boards have all shipped and the project doc has been updated for this run.
http://www.madbeanpedals.com/projects/Laserwolf/Laserwolf_2015.pdf
There are no significant changes other than fixing the couple of mistakes that were on the proto boards.
Brian did you hold mine until the zero point??
Quote from: copachino on March 12, 2015, 04:28:32 PM
Quote from: madbean on March 12, 2015, 03:38:32 PM
The new Laserwolf boards have all shipped and the project doc has been updated for this run.
http://www.madbeanpedals.com/projects/Laserwolf/Laserwolf_2015.pdf
There are no significant changes other than fixing the couple of mistakes that were on the proto boards.
Brian did you hold mine until the zero point??
Cesar - sorry, I forgot. My little brain is a capacity right now.
But the SPDX2 proto boards will ship free I've decided so no worries on that. I actually just got them in and I am building one up right now to verify!
Quote from: madbean on March 12, 2015, 04:45:43 PM
Quote from: copachino on March 12, 2015, 04:28:32 PM
Quote from: madbean on March 12, 2015, 03:38:32 PM
The new Laserwolf boards have all shipped and the project doc has been updated for this run.
http://www.madbeanpedals.com/projects/Laserwolf/Laserwolf_2015.pdf
There are no significant changes other than fixing the couple of mistakes that were on the proto boards.
Brian did you hold mine until the zero point??
Cesar - sorry, I forgot. My little brain is a capacity right now.
But the SPDX2 proto boards will ship free I've decided so no worries on that. I actually just got them in and I am building one up right now to verify!
nevermind just remember to send the afterlife too i think i paid that with the laserwolfim just counting days till arrived
Did the "mid-month" signup sheet ever happen? Not whining here, just want to be sure I did not miss it.... Been traveling for the last two weeks.
Quote from: aballen on March 23, 2015, 04:53:59 AM
Did the "mid-month" signup sheet ever happen? Not whining here, just want to be sure I did not miss it.... Been traveling for the last two weeks.
Yep. Wondering the same thing.
I will get that up this week. Thanks for the reminder.
Must have.....
Sent from my iPhone using Tapatalk
Recieved mine today! I have a question....I ordered the components before the document changed, I have a B50k, instead of the B25k for the "time" pot. What will I be missing if I go with this value? Should I wait and get the B25K?
Thanks alot for your wonderful site! I can't wait to build this!
-donleo
50k is fine. It will give you more delay. I put 25k as stock to limit the delay (and therefore noise) but there is nothing wrong with using a 50k instead.
Whew-hew!!! Thanks!!!
Quote from: madbean on March 23, 2015, 06:48:06 AM
I will get that up this week. Thanks for the reminder.
Ping?