well i have access to an inductance meter so i would like to bobin my own inductor, i have a cry baby board and maybe(if i find it) a broken black inductor, so the core will be useful, but maybe you can tell me about wire gauge and inductance to achive for a some good wah wah and not the standard CB also maybe i will try to use a Weener Wah II board instead of the CB
Quote from: copachino on March 19, 2015, 07:59:50 PM
well i have access to an inductance meter so i would like to bobin my own inductor, i have a cry baby board and maybe(if i find it) a broken black inductor, so the core will be useful, but maybe you can tell me about wire gauge and inductance to achive for a some good wah wah and not the standard CB also maybe i will try to use a Weener Wah II board instead of the CB
Useful information
http://web.archive.org/web/20040413072620/http://www.green-fuz.freeserve.co.uk/inductor.html (http://web.archive.org/web/20040413072620/http://www.green-fuz.freeserve.co.uk/inductor.html)
http://archive.ampage.org/articles/4/pmgd/262720/Re_Anybody_tried_winding_wah_inductors.html (http://archive.ampage.org/articles/4/pmgd/262720/Re_Anybody_tried_winding_wah_inductors.html)
Edit:
This one also:
http://www.qsl.net/k5bcq/COIL/COIL.html (http://www.qsl.net/k5bcq/COIL/COIL.html)
Cody
Small Bear sells an inductor kit, says to use #38 wire.
http://smallbear-electronics.mybigcommerce.com/wah-inductor-kit/
Quote from: davent on March 20, 2015, 01:59:34 AM
Small Bear sells an inductor kit, says to use #38 wire.
http://smallbear-electronics.mybigcommerce.com/wah-inductor-kit/
amazing now, id like to try something too, what if i use i pick up magnet, maybe an alnico rod, to bobin as core, dou you think it will sound something good, or its a bad idea, im triyng to recreat the self inductance of the vintage crap indcutors that sound so good
http://www.geofex.com/article_folders/wahpedl/wahped.htm (http://www.geofex.com/article_folders/wahpedl/wahped.htm)
Always a good read at RG's site too :)
Quote from: nzCdog on March 20, 2015, 04:01:03 AM
http://www.geofex.com/article_folders/wahpedl/wahped.htm (http://www.geofex.com/article_folders/wahpedl/wahped.htm)
Always a good read at RG's site too :)
<ahhh i had read something of this on the site (geofex) but never the part of the bobin yourself, so a second bobbin will do the job i think this has to be a little one, i will buy 2 kits from small bear to try out