This is my first time trying to layout a breadboard for testing from a schematic and some vero board layouts. I used the diy layout creator to lay out all of my components. Thought I'd post it here see if anyone had some suggestions or see's any mistakes I might have made. Here's the schematic and layout I made. (http://i.imgur.com/NnxTugQ.jpg) (http://i.imgur.com/DtzJLb4.png?1)
I also added a 2k trimpot in place of the 1k5 for biasing q2 which I've read is very useful. Thanks in advance everybody.