madbeanpedals::forum

Projects => How Do I? Beginner's Paradise. => Topic started by: Sharkteeth13 on July 13, 2017, 03:11:10 PM

Title: Sanity Check! Diode Switching on Mudbunny and QOB
Post by: Sharkteeth13 on July 13, 2017, 03:11:10 PM

So I am working out replacing the dip switches on my Queen of Bone with a toggle switch.  Can someone verify my wiring is correct with a on-off-on SPDT toggle? 

Secondary question.  If I set up a diode switch with a DPDT toggle on my mudbunny and connect it to D1, do I need to jumper the other diode pads?

Thanks!

(http://i.imgur.com/gpFUL6w.jpg)

Title: Re: Sanity Check! Diode Switching on Mudbunny and QOB
Post by: Sharkteeth13 on July 14, 2017, 11:42:42 AM

I guess it would be helpful to add the schematic.  I am trying to split the 4 dip switches into two toggles.  Is what I am looking for possible or will I just have to do four switches?

(http://i.imgur.com/LILQ3Og.png)