Print Page - Neofuzz V (Deadend FX) WEM Project V fuzz

Title: Neofuzz V (Deadend FX) WEM Project V fuzz
Post by: LaceSensor on February 10, 2020, 11:26:31 PM

First build in what...4 or 5 months...?
Was kindly sent this PCB from DeadendFX (THANKYOU PMoulder)

Went together an absolute treat. I didnt bother with the ferrite bead, and I only had 100k/10k trims (50k/5k specified) but that doesnt make any odds really.
Tuned as per the spec (3.4v Q5 / 1.5v Q3) and sounds really fiery. The filter switches really make massive differences. Ive build three project v's now and this one was a pleasure.

Thanks!

(https://scontent.flhr2-2.fna.fbcdn.net/v/t1.0-9/84598262_10156638840760870_3340198260827488256_o.jpg?_nc_cat=100&_nc_oc=AQkotQjyZ-YGkM2g7LYLN1OxxrgvXNgBRuQk7oXyYq17pNEKRu9Po6PFuwyqNCnIyMxXTmJGSf87wshIJhxwafWF&_nc_ht=scontent.flhr2-2.fna&oh=a69f7b86ce39a741df3ff5fe6376caf7&oe=5EB8913F)

(https://scontent.flhr2-2.fna.fbcdn.net/v/t1.0-9/84538186_10156638840815870_8968755101258743808_o.jpg?_nc_cat=110&_nc_oc=AQkJPq6s9F6PpXLmtEPd2mdaZvCvrGjc0y2sgwaiuFOpkXqGur5fCWDwvmLyGyNSUcVySNjNeU1OUaZi-u2KCP6p&_nc_ht=scontent.flhr2-2.fna&oh=43fcd78c5b77bd1445c497c4be5902e6&oe=5EC5BA24)

Title: Re: Neofuzz V (Deadend FX) WEM Project V fuzz
Post by: nzCdog on February 11, 2020, 07:57:01 AM

Looks great, really clean build! :)

Title: Re: Neofuzz V (Deadend FX) WEM Project V fuzz
Post by: digi2t on February 17, 2020, 10:34:48 PM

deleted

Title: Re: Neofuzz V (Deadend FX) WEM Project V fuzz
Post by: LaceSensor on February 18, 2020, 05:56:34 PM

Quote from: digi2t on February 17, 2020, 10:34:48 PM
We are pleased that you are pleased! ;D Love the graphics.

Is it OK if we post these pics at the shop?

of course, no problem at all

madbeanpedals::forum

Projects => Build Reports => Topic started by: LaceSensor on February 10, 2020, 11:26:31 PM