I've finished a few pedals since January. Some of these are things I just couldn't get to go that were started a while back. Anyway there's a few so I hope no one is offended by the amount. Jimilee this photo gallery is for you. You got me motivated to get off my rear and finish these up.
(https://uploads.tapatalk-cdn.com/20200316/7a8c7a8fde56956cbff139795ce11d47.jpg)
The Florist. I did this in one day and it worked which is very unusual. Really easy build and sounds great.
(https://uploads.tapatalk-cdn.com/20200316/450fb18cf7b6f7d44a2be4a4e4d5a43a.jpg)
Sagan 2. DiabloChris's board and his graphics. Pedal is awesome.
(https://uploads.tapatalk-cdn.com/20200316/af6bef9b59af2ae7694f0c2fa34e4e07.jpg)
Another one of Chris's boards and this has been on going since 2017. Really fun to blend 3 effects into one.
(https://uploads.tapatalk-cdn.com/20200316/eb8068d3d05d8a60f78a732cc72c667c.jpg)
Octagon PedalPCB. I had this built but had never put these sharp graphics on which are courtesy of Gordo.
(https://uploads.tapatalk-cdn.com/20200316/90efe98f779c2a32cf66f02350bf271d.jpg)
Xotic Box. Dan Schumaker's 1590a boards. I had a 1590xx that I had totally screwed drilling I think DiabloChris's Dueling Herbies. That's why there is tape inside covering holes. Dan makes some really good boards.
(https://uploads.tapatalk-cdn.com/20200316/5d7d196b9ee11b669048944b4bfa1b8d.jpg)
This is Rullywows Eaglet. Ben pif'ed it to me 2 xmas's ago. It's a nice overdrive.
(https://uploads.tapatalk-cdn.com/20200316/5d23b60af75e762daf597878d5f0ba6f.jpg)
Wolfshirt. Things don't always work right when you have the transistors backwards. Awesome octave pedal.
(https://uploads.tapatalk-cdn.com/20200316/52f00c8ecb274e080092b2fe45bd2f92.jpg)
Hipster. This worked fine when I tested it an once inside the box I started having problems. After several in and outs I had some bad jacks. Replaced them and this thing rocks for such a small pedal.
(https://uploads.tapatalk-cdn.com/20200316/9f0f4f4256e7e5962995f9d8c2ec81db.jpg)
Harbinger. I just could never get this thing to work. After several attempts I just put in the does not work box. I started pulling them all back out and got lucky with this one.
(https://uploads.tapatalk-cdn.com/20200317/1b5c6a30c9f9dad91c15690827567eef.jpg)
Guitar PCB Sunn T
(https://uploads.tapatalk-cdn.com/20200317/63ddeef0496babde5dc89e3081bbe9d1.jpg)
Mud Flap. Triple Wreck clone.
(https://uploads.tapatalk-cdn.com/20200317/4fbc0d9100329d6870dd0a0f8bf61ea1.jpg)
Honey Bee clone. Board is from Aion.
(https://uploads.tapatalk-cdn.com/20200317/d70b200b4fa3d763200fc3fc33539994.jpg)
Dimension C Chorus. Aion board. I got this back when Kevin started selling them. The effect always worked but I could not get it to bypass a signal. This thing has been rewired like 3 times. The last time was the charm and it works. Really nice sounding.
(https://uploads.tapatalk-cdn.com/20200317/2a4b35723f9016ccdd3fdf30f7197b32.jpg)
AlanP's Horace board. This thing rocks.
(https://uploads.tapatalk-cdn.com/20200317/d39eb02320b99516de57f236a0c4f262.jpg)
One of the few vero builds I've done and boxed up.
(https://uploads.tapatalk-cdn.com/20200317/4c015ec112aad87eb02de8d5b1d8becd.jpg)
Cerulean. Aion board. If I'm not mistaken I think this was modded as a Morning Glory. It sounds nice.
(https://uploads.tapatalk-cdn.com/20200317/5bb01bb377a2c8a5ff7696823982dba0.jpg)
Ace Tone FM-2 Fuzz. This came from MB member imjohnwain and it's a solid little pedal.
Sent from my iPad using Tapatalk
That's a lot of really, really nice builds.
Kapow! What a bunch of brilliant pedals! Toanz to be had! Great work.
That's.... a lot of builds for 3 months.. Good work.
Good job finishing them all up! I like the Xotic box!
The xotic box covers all of the bases for drives! Great idea, nice job!