Hi gang
I've been looking for an over the top phaser for ages and recently discovered the old Roland AP-7 Jet Phaser. I'd love to build one but can't seem to find a reliable PCB or layout for it. Just wondering if anyone can point me in the direction of one?
Thanks as always.
This is the link from the Freestompboxes thread :
https://www.dropbox.com/s/oz2v0wvn327w7pb/Roland%20AP-7%20Jet%20Phaser.zip
I have built it and it works great.
Is that the one with the overdrive circuit in front
Quote from: cortezthekiller on June 11, 2020, 09:24:11 AM
This is the link from the Freestompboxes thread :
https://www.dropbox.com/s/oz2v0wvn327w7pb/Roland%20AP-7%20Jet%20Phaser.zip
I have built it and it works great.
Amazing, thank you!
That is one complicated looking circuit! Looks like there are two boards, the main one and a smaller one. Is that correct?
Yes, one for the main phasing and lfo, and the small one for the mixing and preamp.
It's one of those effects that gets old after about 5 minutes. That said, I'd still love to build one. Be a good excuse to start an Isley Brothers cover band.
Quote from: Aentons on June 11, 2020, 09:32:48 AM
Is that the one with the overdrive circuit in front
Yep that's the one
If over the top phasing with drive in front is your thing and you can hold your breath for ten minutes - https://lectric-fx.com/product/countdown-phaser-v-1-0/
I can answer yes to both of those questions ;)
Thanks for the link. This might be the winner!
Is that a three headed monkey behind you?
Quote from: Scruffie on June 12, 2020, 03:10:27 AM
If over the top phasing with drive in front is your thing and you can hold your breath for ten minutes - https://lectric-fx.com/product/countdown-phaser-v-1-0/
Built it. It's over the top and I love it.
Sent from my iPhone using Tapatalk
Quote from: Guybrush on June 12, 2020, 06:14:46 AM
I can answer yes to both of those questions ;)
Thanks for the link. This might be the winner!
Is that a three headed monkey behind you?
How appropriate, you fight like a cow!