Trying to find out which DD version the Breen is based on - is it V2 or V3?
Thanks!
It's based on whatever version was current in 2013 (from the schematic Dave B. provided to the DIY community).
Quote from: madbean on June 18, 2020, 09:09:17 AM
It's based on whatever version was current in 2013 (from the schematic Dave B. provided to the DIY community).
Thanks - that makes sense, and that's the one I used to make my own board a few years back. I have all ideas that's the V2.
Had a 1st-gen Direct Drive way back when, but not messed with the later ones.