Gudday all. Continuing on with the re-finishing, my mate who I'd build the double looper for told me that the finish had gone strange and could I put something else in it as he never used it anyway. I blame the Rustoloeum auto crystal clear, that stuff is just terrible. The finish had cracked and raised up in strange wave type things.
https://www.madbeanpedals.com/forum/index.php?topic=25896.msg251434#msg251434
Anyway, I sanded the thing back and filled the extra holes with Gorilla Weld initially, and then JB Weld on top of that. I had a GuitarPCB Screaming Ultra lying around that I wasn't ever going to box, so I shoved that in and wired it up for dual channels with a 500k on Gain1 and 1meg on Gain2. Clipping options are red LEDs and 4148s. My friend has a number of builds I've done for him, and this one will go with his DangerZone OCD clone (not that he knows it yet because I haven't told him what I've done).
https://www.madbeanpedals.com/forum/index.php?topic=28587.msg277247#msg277247
So it's a bit tight and I kept the leads a bit longer so I had something to work with. Dual channeling a pedal always adds a bit of mess. Am I happy with the knobs? Not overly, but I prefer to use the relevant colour for the channel LED where possible.