I'm trying to build the Smoothie 2020 phaser, and have ran into a problem. The volume of the pedal is very faint, and there is no phasing effect. In the build doc, under the voltages section there is a blurb "9.42v DC One Spot". Does the pedal require this type of adapter? If so, who has something available? Thanks.
Quote from: Mr.H on July 22, 2020, 01:18:46 AM
I'm trying to build the Smoothie 2020 phaser, and have ran into a problem. The volume of the pedal is very faint, and there is no phasing effect. In the build doc, under the voltages section there is a blurb "9.42v DC One Spot". Does the pedal require this type of adapter? If so, who has something available? Thanks.
I haven't looked at the doc but i'd think that 9.42v DC is what's pertinent as a reference.
dave
It's only mentioned as a reference point. As long as you have a decent 9v supply that's what matters.
If you are getting faint output and no phasing then there is something else wrong in the build I suggest looking at the guidelines for getting help with specific builds:
https://www.madbeanpedals.com/forum/index.php?topic=902.0
https://www.madbeanpedals.com/forum/index.php?topic=26664.0