I've never played this circuit before but it's a cool pedal. It's got its own thing going on and the drive is really smooth. It's got hard and soft clipping and the spectrum knob is a dual filter that sweeps the mids I believe and a low pass at the same time. The bass roll off is a must as the bass is pretty prominent. Good volume cleanup too. I'd highly recommend it to someone looking for a low-mid gain drive. Went with Baron Zemo on the box cause he's a Nobelman, and a badass villain. Box is a tayda matte violet.(https://uploads.tapatalk-cdn.com/20210922/4602b8ddf7e40c36ce465d0cfcc61fc4.jpg)(https://uploads.tapatalk-cdn.com/20210922/193fa6529a448339fb3575e2d5b5abee.jpg)
Sent from my Pixel 5 using Tapatalk
Nice as always! It's a great drive. I'm curious about the ODR-S.
Sent from my iPhone using Tapatalk
Quote from: jimilee on September 22, 2021, 02:06:51 PM
Nice as always! It's a great drive. I'm curious about the ODR-S.
Sent from my iPhone using Tapatalk
Thanks Jimi. After reading the build doc by Kevin at Aion, I guess most people prefer the 1 over the S because the magic is in the spectrum knob and harder to dial in with the three band eq
Sent from my Pixel 5 using Tapatalk
Quote from: Thewintersoldier on September 22, 2021, 02:22:37 PM
Quote from: jimilee on September 22, 2021, 02:06:51 PM
Nice as always! It's a great drive. I'm curious about the ODR-S.
Sent from my iPhone using Tapatalk
Thanks Jimi. After reading the build doc by Kevin at Aion, I guess most people prefer the 1 over the S because the magic is in the spectrum knob and harder to dial in with the three band eq
Sent from my Pixel 5 using Tapatalk
I'll give you that, is there any versatility advantage in you opinion?
Sent from my iPhone using Tapatalk
Over a stock odr-1 you can dial the bass back, but with the board from Brian or aion I think that's the superior version
Sent from my Pixel 5 using Tapatalk
Wow! Super cool.
This is one of my favorite drive circuits. It was actually my first build and I misread Aion's document and completely omitted the hard clipping diodes, but I ended up loving it that way. I think I've built ~6 of these since, all without the hard clippers. If you get a chance to mod it, I'd recommend checking that out. This is my main bass drive too, but I jumped the bass pot and added a clean blend set up. It rips.
That sounds super cool John now I wanna try it on my p-bass. I actually plan on doing a bass drive next so watch out for that!
Stonking build! 8)