madbeanpedals::forum

Projects => Build Reports => Topic started by: mjcyates on August 05, 2010, 05:46:09 PM

Title: Rebote 2.5 Delay
Post by: mjcyates on August 05, 2010, 05:46:09 PM
This is not a madbean pedal but thought I would share anyway.

(http://i734.photobucket.com/albums/ww345/mjcyates/reboteext.jpg)

(http://i734.photobucket.com/albums/ww345/mjcyates/reboteint.jpg)
Title: Re: Rebote 2.5 Delay
Post by: NF Audio on August 05, 2010, 06:49:06 PM
Tidy work. White PCB looks Coooool!
Title: Re: Rebote 2.5 Delay
Post by: mjcyates on August 05, 2010, 07:17:42 PM
Thanks, the pcb is from Francisco Pena at tonepad.com.
Title: Re: Rebote 2.5 Delay
Post by: eniacmike on August 06, 2010, 12:55:32 AM
I am going to have to order one of those from tonepad.

I still like madbeans boards a little better. I have a problem sometimes with those boards with the small solder pads especially when trying to desolder or do any rework. Tonepads boards do look really nice though, especially if you don't make mistakes or changes.
Title: Re: Rebote 2.5 Delay
Post by: jkokura on August 06, 2010, 09:29:31 PM
Tonepad's boards are much different than Brian's (Madbean). Tonepad have manufactured boards, meaning they have what's called solder mask (green is all I've seen from Tonepad). These leave you with a very clean, easy to work with board that is less likely to have parts short out.

Tonepad's boards are awesome, but take time to get to you as they are coming from South America. The main difference I find between them and Madbean boards is simply that they focus on much different projects, which is good! More options is better.

Jacob
Title: Re: Rebote 2.5 Delay
Post by: mjcyates on August 07, 2010, 07:07:01 AM
Agree on all accounts. The last couple of boards I got from them, however, came quicker than ususal.