Text only | Text with Images

madbeanpedals::forum

Projects => Build Reports => Audio/Video Demos => Topic started by: whitebread47 on June 30, 2012, 07:56:38 PM

Title: gtr2's Rub-a-Dub Reverb Demo [Short Brick]
Post by: whitebread47 on June 30, 2012, 07:56:38 PM
So I finally got around to recording a demo for the short brick Belton unit in my build using gtr2's board.  Please excuse the playing; something about hitting Record makes me inept at playing the guitar.  :-\

My signal is a Tele-->Klon (not engaged, just buffering)-->Rub-a-Dub Reverb-->Vox AC15C1 (reverb off on amp).  The playing is just me messing with some old material I'd drudged back up.

http://soundcloud.com/c-412/rub-a-dub-demo

Thanks again to Josh for the board!
Title: Re: gtr2's Rub-a-Dub Reverb Demo [Short Brick]
Post by: greyscales on June 30, 2012, 08:07:46 PM
Thank you SO MUCH for the demo. The short brick is exactly what I was hoping for.
Title: Re: gtr2's Rub-a-Dub Reverb Demo [Short Brick]
Post by: whitebread47 on June 30, 2012, 08:22:49 PM
No problem!  I knew that many around here wanted to know what the short brick sounded like before ordering an expensive BTDR-2, so I'm more than happy to contribute something back to the community.
Title: Re: gtr2's Rub-a-Dub Reverb Demo [Short Brick]
Post by: bigmufffuzzwizz on September 01, 2012, 03:03:48 PM
I really enjoyed that little piece. I think it was a great example showing this circuit. Good sounds from subtle to max.
Title: Re: gtr2's Rub-a-Dub Reverb Demo [Short Brick]
Post by: icecycle66 on September 01, 2012, 04:16:03 PM
3:00
Dang recorditus. ;D

Text only | Text with Images