madbeanpedals::forum

Projects => Build Reports => Topic started by: jfk1063 on October 23, 2012, 03:29:15 AM

Title: 1st MB Build: Kingslayer
Post by: jfk1063 on October 23, 2012, 03:29:15 AM
Hi,
My 1st post and 1st MB build: The Kingslayer.
It turned out pretty good and it's a really great pedal. For R11 I used a 422K and for C15 3n9 (like the Klon). For D4 and D5 I have NOS 1n60 diodes, for D8 and D9 3mm red leds, and for D2 and D3 I used 1n4148 in series and 1 1n4007 (somehow this combination sounds great to me).
Great pedal and many thanks to Brian!
Cheers from Amsterdam!
Title: Re: 1st MB Build: Kingslayer
Post by: bigrigg on October 23, 2012, 04:34:32 AM
That's a great 1st MB build.  Looking forward to more.  Thanks for the parts info too.
Title: Re: 1st MB Build: Kingslayer
Post by: jfk1063 on October 23, 2012, 08:03:42 AM
Thanks, I also used carbon/metalfilm resistors and panasonic caps like in the Klon.
This is a killer pedal!  :o
Title: Re: 1st MB Build: Kingslayer
Post by: nzCdog on October 23, 2012, 08:50:19 AM
Tidy build! ;D
Title: Re: 1st MB Build: Kingslayer (with live clip)
Post by: jfk1063 on July 01, 2013, 07:42:45 AM
Hi,
I 'needed' another Kingslayer since it's such a great pedal! (the best pedal I found that also works with the neck-pickup without making it muddy)
Here it is! (for me 422K for R11 sounds better)

Here is a clip. The solo starts around 1:58. I use the Kingslayer for medium gain and boost it with a regular centaur after it (apis board).

http://www.youtube.com/watch?v=HAtt6Erjt-Y

Thanks and cheers from Amsterdam,
  John
Title: Re: 1st MB Build: Kingslayer
Post by: Haberdasher on July 01, 2013, 09:01:43 AM
yeah, that one looks really good to me
i like the arrangement in that type of enclosure.  might have to pick one up for meself...

cheers
Title: Re: 1st MB Build: Kingslayer (with live clip)
Post by: micromegas on July 01, 2013, 09:18:13 AM
Quote from: jfk1063 on July 01, 2013, 07:42:45 AM
Hi,
I 'needed' another Kingslayer since it's such a great pedal! (the best pedal I found that also works with the neck-pickup without making it muddy)
Here it is! (for me 422K for R11 sounds better)

Here is a clip. The solo starts around 1:58. I use the Kingslayer for medium gain and boost it with a regular centaur after it (apis board).

http://www.youtube.com/watch?v=HAtt6Erjt-Y

Thanks and cheers from Amsterdam,
  John

I know that what I'm going to say is completly off topic, but my gf and I are starting a travel through Europe tomorrow and I'm staying in Amsterdam the nights from 9 to 11.
Do you recomend some place to go to listen good jazz/blues music those days?
Title: Re: 1st MB Build: Kingslayer (with live clip)
Post by: jfk1063 on July 01, 2013, 10:02:34 AM
Quote from: micromegas on July 01, 2013, 09:18:13 AM
Quote from: jfk1063 on July 01, 2013, 07:42:45 AM
Hi,
I 'needed' another Kingslayer since it's such a great pedal! (the best pedal I found that also works with the neck-pickup without making it muddy)
Here it is! (for me 422K for R11 sounds better)

Here is a clip. The solo starts around 1:58. I use the Kingslayer for medium gain and boost it with a regular centaur after it (apis board).

http://www.youtube.com/watch?v=HAtt6Erjt-Y

Thanks and cheers from Amsterdam,
  John

I know that what I'm going to say is completly off topic, but my gf and I are starting a travel through Europe tomorrow and I'm staying in Amsterdam the nights from 9 to 11.
Do you recomend some place to go to listen good jazz/blues music those days?

Check out:

Bimhuis
Melkweg
Paradiso
North Sea Jazz Club
Maloe Malo
Bourbon Street
Cafe Alto

You have to check google for their agenda. Have fun here!
Title: Re: 1st MB Build: Kingslayer (with live clip)
Post by: DutchMF on July 01, 2013, 11:03:24 AM
Quote from: jfk1063 on July 01, 2013, 10:02:34 AM
Quote from: micromegas on July 01, 2013, 09:18:13 AM
Quote from: jfk1063 on July 01, 2013, 07:42:45 AM
Hi,
I 'needed' another Kingslayer since it's such a great pedal! (the best pedal I found that also works with the neck-pickup without making it muddy)
Here it is! (for me 422K for R11 sounds better)

Here is a clip. The solo starts around 1:58. I use the Kingslayer for medium gain and boost it with a regular centaur after it (apis board).

http://www.youtube.com/watch?v=HAtt6Erjt-Y

Thanks and cheers from Amsterdam,
  John

I know that what I'm going to say is completly off topic, but my gf and I are starting a travel through Europe tomorrow and I'm staying in Amsterdam the nights from 9 to 11.
Do you recomend some place to go to listen good jazz/blues music those days?

Check out:

Bimhuis
Melkweg
Paradiso
North Sea Jazz Club
Maloe Malo
Bourbon Street
Cafe Alto

You have to check google for their agenda. Have fun here!

I can especially recommend Cafe Alto on Wednesday nights. Then Hans Dulfer takes the stage, he's Hollands best known Jazz/Blues saxophone player and a hell of a cool guy! You might know his daughter Candy Dulfer (also on saxophone) from her work with Prince (yes, for real!!). A girl I regularly play with had the balls to bring her sax to Alto on a Wednesday night and managed to get on stage with Hans, she tore the place down!

Paul
Title: Re: 1st MB Build: Kingslayer
Post by: Jabulani Jonny on July 02, 2013, 08:15:31 PM
Man, great looking and great sounding pedals!

You've got some really nice chops as well.  That video is going to be bookmarked and will be some upcoming study material!
Title: Re: 1st MB Build: Kingslayer
Post by: slimtriggers on July 03, 2013, 05:19:09 AM
Nice builds and great playing!
Title: Re: 1st MB Build: Kingslayer
Post by: gingataff on July 03, 2013, 06:06:52 AM
Great build, awesome band and sweet guitar! What is it?
Title: Re: 1st MB Build: Kingslayer
Post by: jfk1063 on July 03, 2013, 11:09:30 PM
Thank you!  :)

It's a Collings 290 guitar.
Title: Re: 1st MB Build: Kingslayer
Post by: jfk1063 on October 17, 2013, 12:37:28 AM
Hi everyone,
Here's my 3rd Kingslayer! Now with splitted gain pot, sounds good when the clean is just a little bit less then the gain/dirt.
Cheers!
Title: Re: 1st MB Build: Kingslayer
Post by: youngstownguitar on October 17, 2013, 12:13:13 PM
really nice looking!