madbeanpedals::forum

General => Open Discussion => Topic started by: fish22 on October 23, 2012, 07:20:48 AM

Title: 1590a TubeScreamer PCB out there?
Post by: fish22 on October 23, 2012, 07:20:48 AM: Hey just wondering if there is a 1590a TS9 or TS808 PCB available somewhere?
Thanks!
Title: Re: 1590a TubeScreamer PCB out there?
Post by: midwayfair on October 23, 2012, 07:47:55 AM: I don't think so ... There are several tubescreamer-ish derivatives (with no buffers) that will fit in a 1590A even on perfboard or an etch: Eternity, Zen Drive, etc. The buffers take up a lot of room, I haven't been able to make a layout fit without resorting to standing resistors.
Title: Re: 1590a TubeScreamer PCB out there?
Post by: fish22 on October 23, 2012, 07:58:08 AM: Ok that is kind of what I figured. Thanks midwayfair.
Title: Re: 1590a TubeScreamer PCB out there?
Post by: pickdropper on October 23, 2012, 12:34:40 PM: I've been thinking of doing an SMT version of this. If people are interested, I could do it sooner rather than later.
Title: Re: 1590a TubeScreamer PCB out there?
Post by: eldanko on October 23, 2012, 12:43:26 PM: Didn't Grind Customs make something like this? The Daily Driver?
Title: Re: 1590a TubeScreamer PCB out there?
Post by: jimmybjj on October 23, 2012, 12:48:36 PM: He built one but I think it was saxonthefest board
Title: Re: 1590a TubeScreamer PCB out there?
Post by: madbean on October 23, 2012, 12:57:29 PM: I've actually done one, but never really got around to having it made. If there is enough interest, I could get some.
Title: Re: 1590a TubeScreamer PCB out there?
Post by: pk1802 on October 27, 2012, 05:56:20 PM: Quote from: pickdropper on October 23, 2012, 12:34:40 PM
I've been thinking of doing an SMT version of this. If people are interested, I could do it sooner rather than later.

I'd be interested in a SMT tubescreamer. I've been wanting to get started with SMT, something simple(ish) like a tubescreamer seems like a good place to start.
Title: Re: 1590a TubeScreamer PCB out there?
Post by: jimmybjj on October 27, 2012, 07:07:14 PM: I have one on the way for a personal project. I will have a couple extra's. Both buffers included with the option to eliminate one or both, fat and bright switches.
(https://lh6.googleusercontent.com/-A67D_9mlbRM/UIyECTT0iZI/AAAAAAAAJNA/uqNr7S2VpFE/s288/ts8082.jpg)
Title: Re: 1590a TubeScreamer PCB out there?
Post by: saxoftenest on October 28, 2012, 07:46:47 AM: I prototyped a layout. Then I remembered I'm not really a Tube Screamer guy. ;D

Brian, I think this would be a cool addition to the baby boards - the lima bean?

Here's the one I built up. It has a diode switch for funsies:

(http://imageshack.us/a/img9/82/kloneand808guts.jpg)
Title: Re: 1590a TubeScreamer PCB out there?
Post by: pickdropper on October 28, 2012, 07:58:55 AM: Quote from: pk1802 on October 27, 2012, 05:56:20 PM
Quote from: pickdropper on October 23, 2012, 12:34:40 PM
I've been thinking of doing an SMT version of this. If people are interested, I could do it sooner rather than later.

I'd be interested in a SMT tubescreamer. I've been wanting to get started with SMT, something simple(ish) like a tubescreamer seems like a good place to start.

Cool, I may do that.

While I am not certain on the Tubescreamer, I have been doing some SMT layouts lately and will likely have a few boards leftover.

That is, of course, if they work when they get here. ;-)
Title: Re: 1590a TubeScreamer PCB out there?
Post by: njkke on February 10, 2013, 09:10:21 AM: Quote from: jimmybjj on October 27, 2012, 07:07:14 PM
I have one on the way for a personal project. I will have a couple extra's. Both buffers included with the option to eliminate one or both, fat and bright switches.
(https://lh6.googleusercontent.com/-A67D_9mlbRM/UIyECTT0iZI/AAAAAAAAJNA/uqNr7S2VpFE/s288/ts8082.jpg)

Hi Jimmibjj, I'm interested in your PCB, Have you have one?
Title: Re: 1590a TubeScreamer PCB out there?
Post by: jimmybjj on February 10, 2013, 10:46:53 AM: I think i have a couple of those still, let me check and i'll pm you.
Title: Re: 1590a TubeScreamer PCB out there?
Post by: GVC66 on January 15, 2014, 03:33:03 AM: Hello, very interested if you have any left...
Title: Re: 1590a TubeScreamer PCB out there?
Post by: kothoma on January 15, 2014, 05:53:16 AM: This one too includes both buffers: http://diy.thcustom.com/shop/ts-mini-pcb/
Was recently on sale, is currently out of stock :(
Title: Re: 1590a TubeScreamer PCB out there?
Post by: pickdropper on January 15, 2014, 07:16:00 AM: I have some that I've had available for a while. Shoot me a PM if you are still looking for one.

(http://img.photobucket.com/albums/v158/pickdropper/Guitar%20Pedals/TubeScreamer3_zpsb222ad98.jpg) (http://smg.photobucket.com/user/pickdropper/media/Guitar%20Pedals/TubeScreamer3_zpsb222ad98.jpg.html)