Here is a Chimera clone mod for bass,never did get the LED working,it sounds pretty gnarly.
(https://dl.dropbox.com/u/5560115/Vader.jpg)
(https://dl.dropbox.com/u/5560115/distortion.jpg)
Vader rocking the double neck? Awesome graphic man! ;D
Electriced guitar.
When I saw the thread title I was really hoping it was...
(http://img651.imageshack.us/img651/5944/82190344.jpg)
VADER TIME!!!!!!
Nice build all the same :)
Quote from: Stomptown on February 12, 2013, 07:03:16 PM
Vader rocking the double neck? Awesome graphic man! ;D
Not sure it's possible to out-awesome that image 8)
Totally got the led working
(https://dl.dropbox.com/u/5560115/rockvader.jpg)
Awesome job Jimi ! If you wet sand the enclosure before the decal work you can get almost a polished look
Quote from: pedalman on February 15, 2013, 11:53:29 PM
Awesome job Jimi ! If you wet sand the enclosure before the decal work you can get almost a polished look
Thanks man,if you look at it on your pedal board while you're playing,you can't see the difference ;D I did think about sanding it and shining it up,but I'm really just too lazy to do that for a working pedal for myself. I may try that for the decimator I am building though. What grit should I use?
Quote from: jimilee on February 16, 2013, 05:54:30 AM
Quote from: pedalman on February 15, 2013, 11:53:29 PM
Awesome job Jimi ! If you wet sand the enclosure before the decal work you can get almost a polished look
Thanks man,if you look at it on your pedal board while you're playing,you can't see the difference ;D I did think about sanding it and shining it up,but I'm really just too lazy to do that for a working pedal for myself. I may try that for the decimator I am building though. What grit should I use?
I usually start dry sanding at about 100 and work my way up. I wet sand from 220 up to 600 BUT I am growing frustrated with the fact that all of my polished enclosures have oily fingerprints on them. I am starting to sand to about 150 instead and cross-hatch the enclosure for a cool look. If you want the polished look without the hassle you can buy a pre-polished one from small bear for about $10 and it is almost like looking into a mirror...
you dont really need a spit shine, just take the factory veiny look out