I removed C12 and reduced C10 to 470p.
[soundcloud]https://soundcloud.com/secretrogue/return-of-the-pearl-octaver[/soundcloud]
Description from soundcloud:
"Tweaked my Pearl Octaver clone, very satisfied with it now, gonna be back on the board, no need to buy an Octron.
Forgive the hum, I was using my Strat on the middle position, and I'm plugged in the high gain input of my VTM. With the coil tap on, it's the beefiest position on it, but it's got a bit of noise.
Here are my settings:
normal signal: 25%
octave up: 100%
octave down: 50%
two octaves down 25%
recorded on my iPhone."