Messages

Thanks a lot for your kind words 

That is awesome build! What ldrs did you use?

The LEDs delivered by Musikding! Sorry, no technical informations about these here 

Special request... 
A picture from the inside!

Hi,
here's a picture of my first finished 2021 project 
Regards

Hi,
same problems here! I ordered my Pangea August '19 and it was lying in the shelf until now.
The Pangea itself works perfect and sounds absolutely great, but the relais switching does not work.
I checked everything and my guess is that the pic controller causes the problem, because you can switch by bridging pin 2 & 3 of the controller. I'll ask the german reseller tomorrow!
And yes, wrong relais first... but they sent me the correct one.
Regards

Yes, it's a Rockcase but modified to my needs 

I bought the Amp1 soon after it was on the market and tested it with different speakers and cabinets but I was
not 100% satisfied. So, I returned it within the 30-days-money-back-guarantee.
Months later I made a 1x12" cabinet for a friend and his Amp1 and we tested all of my speakers. The
winner was the WGS Veteran 30. We were very impressed by the Amp1/WGS combination.
Weeks later I ordered a second Amp1 and buildt two 1x12" cabinets. One for home and one for the rehearsal room.
I compared my cabinets against the Bluguitar Fatcab -had one at home for two weeks- but the Fatcab was too 'fat' for me 
I found the perfect combination for me. It works great...Clean,overdriven, Distorted...With Stratocaster, Telecaster and Les Paul guitars.

That's mine! At the moment.... 

Top (in the dark): Carl Martin Power Supply - DIY Level-Tone-Control for the Korg - Korg G4 - Tuner - Battery pack for Wah and Gain & Balls
Middle: Vox Time Machine
The rest: DIY Looper to switch between Time Machine and Korg G4 - Rockett Dude - DIY Gain & Balls - Amp1 - George Dennis Wah

-

those are nice, it's that the new behringer tremolo?

No! Behringringer of course  

Hey there,

pls. take a look at my latest work. It's a series of three.
Any comments are welcome!

Regards,
highway31

Where did you pick up that enclosure?

...another friend made it 

pickdropper,

Btw, my comment wasn't taking anything away from this build.  It looks fantastic.

I just thought I'd mention it because I think the copper would fit in very well with your steampunk vibe.

Yes, a great suggestion. I used to use/mix different types of sheet metal on my '1 in 1'  stompboxes before. I really like the contrast!

Thanks a lot for your kind words 

I'll try to answer all of your questions...

Anybody see the switch on the echo? That lever is beyond cool, where did you get that?

Got it from http://www.tube-town.net/ttstore/product_info.php/language/en/info/p3681_Kippschalter--1-polig-EIN-AUS.html

The amp meter is also from Tube Town
http://www.tube-town.net/ttstore/product_info.php/info/p5680_Retro-Panel-Meter-100-mA-DC.html
Diameter is 33.8mm.

...I highly recommend using one an enclosure from PPP with their transparent copper finish.

Would you send me a link, please.

Any chance of a peek inside?

Sorry, I forgot to take pictures from the inside before it left.

Regards,
Highway31

Hi there 

It's a 3 in 1 for a friend!
Overdrive -> Phaser -> Echo
Any comments are welcome!

Regards,
highway31

I got the sheets from a plumber/sheet metal worker an some are from my dad.