Messages

super nice guitar !!!
...never played one but I'm really thinking of getting a TVL Jazzmaster 

thanks !!! 

Hi !
I got my Lab Series preamp project up and running, it sounds really good ! I still didn't calibrate the trim pots, only set the compressor trim to cero.
But before I put it in the enclosure I have a couple of questions , just to verify that the preamp is working as it should.  One is the Limit function, I get maximum compression with the knob all the way down...and the other one is regarding the Hi-Lo switch, signal is boosted in "Lo" position...it's this the way it was intended...?
Thanks for your help 

I've got the 2.5kA pots from here:

http://uk-electronic.de/onlineshop/product_info.php?products_id=1080

...and the dual 100kC from here :

http://buildyourownclone.com/collections/parts-1/products/c-taper-16mm-dual-gang-pc-mount-potentiometer

...Thankx to Kevin for the advice 

was in my list of "will do" but never got the chance to source those 5106 bbd, appart from Banzai at €59.50...

C2 is correct, R5 22k seems to work for me 
Thank you Brian !!!

Hi !
My Deathklaw is working good but dry signal is a little below unity level and a little dark sounding. Everything seems to be correct...I'm double checking resistors and caps right now, but I really don't know where to look...any ideas will be appreciated, thank you !

so much that I fix things that aren't broken... oh wait... that's called modding... 

I'm usually more about breaking things that aren't broken when I start modding.

...I thought i was the only one 

...I have a printed copy of the .pdf, I got them scanned, it is not highest quality but you can read it with no problem...I really can't find the original doc. in my computer.
Just PM me your email address...

Etched board...? If so, maybe I can help.

...do you have an estimation for the shipping cost to Europe...?

I would take one enclosure in a group buy, too (if it is possible for Europeans to join).

the same here ! 

hi !
...can 25KA pots be used instead of 20KA pots in the Demented Compressor ?
And last one:can I use 620 ohm for those 619 ohm resistors ?
Thank you !!!

the same over here, I'll be more than happy to pay in advance for the new boards.

I knew it !!!