Express PCB is a good place to start. I used to do quick schematics on that before i tried to do the formal one on Eagle because it was so much faster. Now Eagle isn't so bad. I don't know if anyone has every messed with OrCAD but it is terrible! You need a college degree for that thing.
- Welcome to madbeanpedals::forum.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#1
Open Discussion / Re: PCB program that will auto check with a schematic?
February 20, 2014, 07:54:11 PM #2
Open Discussion / Re: Mammoth Problems
May 17, 2013, 08:05:01 PM
Hello All,
I apologize for the issues some of you have had with our customer service/ products. We had some issues with our powder coating equipment that was hurting us but that has since been upgraded so going forward, that quality should be much improved. On the customer service side, we try and answer every email in a timely fashion and get people taken care of as quickly as possible. Unfortunately, some days we aren't able to respond to everyone but everyone will get a response. If anyone has any issues with an order or any questions for us at all, please email us at sales@mammothelectronics.com or isaac@mammothelectronics.com and we will get back to you. We don't want anyone to have a bad experience with us and we will do what we can as fast as we can to make things right. Again, i apologize for any slow communication or bad orders. Please contact us so we can get you taken care of.
Than you
Isaac
sales@mammothelectronics.com or isaac@mammothelectronics.com
I apologize for the issues some of you have had with our customer service/ products. We had some issues with our powder coating equipment that was hurting us but that has since been upgraded so going forward, that quality should be much improved. On the customer service side, we try and answer every email in a timely fashion and get people taken care of as quickly as possible. Unfortunately, some days we aren't able to respond to everyone but everyone will get a response. If anyone has any issues with an order or any questions for us at all, please email us at sales@mammothelectronics.com or isaac@mammothelectronics.com and we will get back to you. We don't want anyone to have a bad experience with us and we will do what we can as fast as we can to make things right. Again, i apologize for any slow communication or bad orders. Please contact us so we can get you taken care of.
Than you
Isaac
sales@mammothelectronics.com or isaac@mammothelectronics.com
#3
Open Discussion / Re: Has somebody jacked BYOC?
May 10, 2013, 03:26:00 PM
Nevermind, just tried it and it worked!
#4
Open Discussion / Re: Has somebody jacked BYOC?
May 10, 2013, 03:23:40 PM
I was wondering the same thing. It seems any link to the forum is bad.
#5
Build Reports / Re: My Little Angel (birthday ed.) - Xmas PIF Build
March 19, 2013, 02:26:09 PM
Dang. That is about as slick as it gets. Nicely done!
#6
General Questions / Re: Anyone else having issues with Mammoth electronics?
March 06, 2013, 03:51:38 PM
Hey Everyone!
I'm Isaac with Mammoth Electronics and this is my first Mad Bean post! Not exactly the most ideal subject for a first post but hey, it is what it is. I don't usually get on forums very much because A) I don't have too much time to spare up here at Mammoth and B) Most everyone here is smarter than me anyway when it comes to this stuff and everything is already answered! I mainly just creep around and look at some of the builds and tech stuff and try to address customer issues. Just to tell you a little bit about me, i got into the effect pedal business back in 2001 at Keeley Electronics and worked there for about 8 years, in which i was the service manager for 5 of those years. Last November I was hired as General Manager at Mammoth Electronics so Blake could focus more on marketing and graphic design. Since then, we have grown quite a bit and unfortunately in growing that fast, you have some growing pains. We are taking steps to remedy these problems but it takes a little time for new systems and employees to get integrated into the machine. That being said, we don't want anyone to have a bad experience with us and we will do what ever it takes to try to help you out with your situation. So, if you are having trouble with an order or have any questions for us at all please contact us and we will do everything we can to help you out. You can get us at:
isaac@mammothelectronics.com for me
blake@mammothelectronics.com for Blake
sales@mammothelectronics.com for James
or call us at 405-254-4112
We try to answer every email as soon as they come in and get every phone call but sometimes that isnt possible but if we miss your call, please leave a message and we will either call you back or send you an email in response. Thanks for your time and happy building!
Isaac
I'm Isaac with Mammoth Electronics and this is my first Mad Bean post! Not exactly the most ideal subject for a first post but hey, it is what it is. I don't usually get on forums very much because A) I don't have too much time to spare up here at Mammoth and B) Most everyone here is smarter than me anyway when it comes to this stuff and everything is already answered! I mainly just creep around and look at some of the builds and tech stuff and try to address customer issues. Just to tell you a little bit about me, i got into the effect pedal business back in 2001 at Keeley Electronics and worked there for about 8 years, in which i was the service manager for 5 of those years. Last November I was hired as General Manager at Mammoth Electronics so Blake could focus more on marketing and graphic design. Since then, we have grown quite a bit and unfortunately in growing that fast, you have some growing pains. We are taking steps to remedy these problems but it takes a little time for new systems and employees to get integrated into the machine. That being said, we don't want anyone to have a bad experience with us and we will do what ever it takes to try to help you out with your situation. So, if you are having trouble with an order or have any questions for us at all please contact us and we will do everything we can to help you out. You can get us at:
isaac@mammothelectronics.com for me
blake@mammothelectronics.com for Blake
sales@mammothelectronics.com for James
or call us at 405-254-4112
We try to answer every email as soon as they come in and get every phone call but sometimes that isnt possible but if we miss your call, please leave a message and we will either call you back or send you an email in response. Thanks for your time and happy building!
Isaac
Pages1