Messages

exactly, even though i didnt like the mod, because i want my univibe to add zero gain
but the volume is definately increased
but it seemed like the only way for the neovibe

in the harbinger theres the modern input, which should have enough headroom
the mod will only apply for the vintage mode
are speaking of the modern or vintage mode? or have both a volume drop?

at modern mode the harbinger should have plenty of headroom
i would recommend check your resistor values...

yes theres also a mod to increase unity gain
take a look at RG keens neovibe:
http://www.geofex.com/Article_Folders/univibe/vibeupdate.pdf

page 4 - but it increases gain as well, so the unit will distort a little bit

if youre in europe this could be interesting
http://uk-electronic.de/onlineshop/product_info.php?products_id=3860&osCsid=71e9ce41f5734659803c5f5781fdb0c4

i like this shop, has some great stuff imo
never tried those enclosure though

yes, all of them i opened had the hotpotz inside, which is a decent pot for sure ! in most shops i saw it for at least 15€ or more
so yes definitely bargain

for my wah builds i bought second hand crybabys for 20€-30€
41 pound is not a bargain when you just need the enclosure...
i recommend searching ob ebay or some online marketplace for used wahs

btw: uk-electronic sells now wah shells for 30€ too

thats amazing. your sister got talent  if she is bored i have some boxes which need finishing... just kiddin :-)

thats a gorgeous build. well done
im glad you liked my page and the mods i did. great they all worked out :-)

the graphics look cool. btw im building my second harbinger right now, these things get you addicted

can you post some pictures?
does bypass work?
have you double-checked your wiring?
what trannies do you use?

looks fantastic keef
which circuit is thedanger zone based on?

i have experience only with the univibe when it comes to optical phasers but arent they always thumby?
have you tried to dim the led?

fantastic looks great inside and outside
im very curious how it sounds demo?

haha the crop was the first thing that i noticed when i looked at the pic

if you have a DMM you can measure the pins for resistance.
where you get a little resistance (around 20-30Ohm) thats the pins you need to connect

the big cheese already has a buffer at the beginning and at the end (to my knowledge)
im curious how your debugging goes on

thanks a ton cody  . how did you do it? which tool did you use?

hmm following you can try:
-) have you connected your output right? i cant see if its connected to either the cap or the output pin
-) the pads from the balance pot suffered heavy soldering. i would check there if the pot pins have a connection to the circuit

otherwise: can you post a pic of your 3pdt wiring as well please?