Messages

Hi! After building the stock unit time ago I'd like to try some of this mods 

For the threshold mod, I'd change R10 (10k) for a 20k pot so when it's at noon it would be stock. More resistance means higher threshold?

About the attack mod I'm a little confused because John suggested to change R9 (22R) and that's exactly what Pickdropper did with his mod. Pickdrooper used a 250k pot instead of that 22R resistor, which looks too much at first sight. And for what the reviews that I've read it doesn't really feel as an attack pot. Any idea?

Any help is welcome!

Ey Jon. I've tried lots of combinations...for the small cap I've used from 220pf to 220nF, and for the big cap from 1uf to 10uf. I've just tried a 250K log pot and it seems to work better so I will try a couple of C taper pots, maybe that's the problem.

Thank you very much 

Hi guys. I want to add a bass cut pot to the input of a Fuzz Face and I'm not sure I've understood it well.

I'm using a 1M linear pot with lugs 1&2 tied together to the input circuit, where they meet one lug of the small capacitor. The 3 lug goes to the negative side of the electrolytic cap and then the other lugs of both capacitors together. With that configuration I'm having the full bass sound with the pot fully clockwise but as soon as I turn it counterclockwise I got the thin sound. There's no middle sounds. What am I doing wrong?

I've read this topic http://www.madbeanpedals.com/forum/index.php?topic=20195.0 and tried to do what Rej says but I think I'm doing somethig wrong.

Any help is really appreciate, cheers.