Messages

Does the tube in the Archibald have to be directly connected to the main board, or can it be "wired" to orient it in a larger "box?"
I have an Ibanez Tube King T999HT that has a dead power transformer (made from unobtainium)
Too nice a shell to just toss and it should have all the room I need.  But the tube & socket would have to be wired to the board to fit.
Thanks
Michael

I wanted to purchase one of the fantastic rebuild boards that R.G. Keen designed for the "large" Thompson/Vox amplifiers such as the "Beatle" head.
The site "Thompson Vox Repair" appears to be down and I have not been able to contact him via Geofex or the email I have for him from a previous project to see if the boards are still available for purchase.
He seems to have dropped off
Anyone know of a current email/contact for him?
Thanks
Michael

On the schematic both C29 & C30 are listed as 220uf/25 VDC (as well as the Shopping List)
But the "Shopping List" has C29 & C30 as 100uf/25 VDC (which aren't listed in the Shopping LIst)
Which is the correct value for C29 and C30

Thanks
Mike

Since the Harbinger 2 has an optical control for the Speed, has anyone tried to build either version of the Harbinger in an old Morley pedal.  I wonder if that might do two things
1 - larger shell with Power Supply
2 - Set up for an optical control already

Just an idea
Michael