Messages

Thanks for the welcome and the tips!  The clips sound like a good idea, I'll put them in my next electronics order. 

It seems to work great now, thanks for the help pandadandan and jkokura!

great, thanks!  I connected a wire from the grounding pins on the switch to input jack, and it seems to work now, is this ok?  And then I run a wire from the ground and solder it to the inside of the case?

Hi,

This is my first build, and I seem to be having some problems.  I've made cables and switchers before, but never a pedal.  The problem is that when bypassed, the output is very week, and when the pedal is engaged, there is no output.  Also, when I switch between the two there is a loud pop.  Thanks in advance.