I bought the slow loris and a green bean pcb I built the slow loris first and it works fine now I got done building the green bean and it does not work . When the switch is in bypass mode I get sound from my amp, when I press the switch no sound. I double checked soldering, and I tested resistors, ri should be 1 M ohm and on the pcb it tested at0.2 ohm, r6 should be 4k7 and tested at 3.0 k, r19 should be at 10 k and tested at 3.0 k. All these test were made with no power on. When I plug in power the r17 and d6 gets really hot, I am at a loss please help, also with spdt switch in bypass mode and power still on the r1 and d6 still stays hot. :