I am getting no sound from my Nom Nom 2015. I have tested all voltages from both ICs and they are showing values equal to the specs in the manual. When I applied my sound probe I received sound only up to the 1st leg of C1 (10nF cap). C1's output has no sound. I have replaced C1 with a different cap but that did not fix the problem. Sound signal does not seem to be getting passed that component/area on the board.
A few things to note about my build:
Q1 is a 2N5087
Q2, Q3, Q4, Q5 are 2N5952, so I turned them 180' on installation as their pinout is opposite of the suggested 2N5457
trannies.
Any ideas what is causing this or what I have done wrong? Any advice would be appreciated.
-Tom
A few things to note about my build:
Q1 is a 2N5087
Q2, Q3, Q4, Q5 are 2N5952, so I turned them 180' on installation as their pinout is opposite of the suggested 2N5457
trannies.
Any ideas what is causing this or what I have done wrong? Any advice would be appreciated.
-Tom