Topics

Hi everyone. Does anyone hear the Aquaboy too bright? I have managed to lower the treble content by adding a small capacitor in series with the 1Meg resistor but im wondering why is it brightening the signal so much

Hi everyone. Does anyone know why the harbinger 1.5 uses 18volts for the signal path and 15 regulated for the lfo and not the way around? I wonder why the easyvibe uses the other way around. 18v for the lfo and 15v for the signal path. The harbinger sound super good but im wondering how different would the lfo behave at 18 instead of 15. Also, would the lfo behave worse if fed directly from the unregulated 18v from the charge pump?

Please help. I have distortion in pins 1 2 3 and 7 of the compander. Any ideas?

Hello everyone i just finished an aquaboy with the mod board and when the pedal is bypassed y can hearva clock whine and also if i max the feedback i can hear oscilattion bleeding through. Any ideas to how i can stop the effect bleeding through when its bypassed? Has anyone manage to getvthe aquaboy to work without this problems? I saw that many people where complaining about the same things. Im using shielded cables from both jacks directly to the 3pdt instead of the pads in the board but that trick didnt solve the problem

Hello everyone. I just finished my aquaboy and sounds fantastic but im getting a high pitch squeal when the pedal is bypassed. I made it with the MOD board and when i engage the MoD with the pedal bypassed the high pitch squeal oscilates at the rate of the MOD. Any suggestions? I set all the trimpots to the center and didnt calibrate them yet

Hello everyone. I built a total recall and it sounds pretty good but it has too much distortion. Im having distortion signal on ic6s input. Is that normal or should i have clean sigal there? Thank you very much!!