Topics

Not an outstanding circuit, but works
It took me a while to tweak, and i'm still 100% satisfied with that thing
but here it is...

fuzz factory with regular pots, what a lot of wiring fun

A project i've been working on lately
the signal goes in a SHO first then to an effect send (put your favorite OD here) then effect return then another SHO stage the your amp.
Since putting a boost before your OD will most probably only get you more gain an no volume increase,
I've build this to get more gain and more volume in one pedal click
the two boost are engaged at the same time in a true bypass way by the 2 dpdt relays.

(I know putting a boost before some OD like the zendrive will increase the volume also, put with my Catalinbread clone it only gave me more gain)




By the way the art is a montage I found on google . I've adapted it with The labels but the original image is not mine

I needed a small pedal board, battery powered for when I can't bring my big board
A Ross compressor (Tonepad), serendipity and a grapevine into a modded GE-7 (sniper mod), sounds great.
I once saw people fixing their stompboxes to their board with bike chain links, it turns out you can fix them to one another

Thanks Madbean for all the work you put making these layouts

I've etched 2 just in case and I won't be needing this one
Just PM me your address It's going to the 1rst who want's it
Pat

What's that distortion/fuzz that comes up at aprox 1 min
anyone knows what it is???
i had this sound in my head all morning

Pat

finaly done, work fine now anyways i'm having fun with this one

I can't seem to get more than 8-9 seconds loop from the loophole, anyone had the same problem?
In the note it says you can get up to 20 sec.

Pat

if I understand this corectly, we don't have to use 3pdt switches on the loophole 2pdt should be enough.
just like that


I can't see why not, Am I right?

i'm just missing a voice recorder chip, hope smallbear still have some

A modded meat head with a input cap rotary switch
I got to buy some blue pnp for the box etch, because the  acid went thru the toner on this one
I like it anyways
I know i'm a long way behind most of you but anyways... here it is:

this is a meathead clone with an SHO in front of it, There's a rotary switch for the input cap of the meathead that can switch between 10n, 22n, 33n, 68n, 1Micro got the idea from the seymour duncan tweak fuzz

Here my new SFT clone thanks madbean for the project
Nice little overdrive very dynamic I love it
I've built it to take 18v but have'nt try it yet

just finish a pedal for our drummer who want to get back on guitar

found this on the net, I think i'll try this Next

I would like to build this one
it souds amazing if your into that kind of fuzz 8bit sound
http://www.youtube.com/watch?v=NZKeGsWRRm0

hey

In the  clip below burgerman use the catalinbread SFT at 18v and says that it gives more headroom, is it possible to do the same with the faultline clone?
WIll the led burn out since the resistor is at 47k?

http://www.youtube.com/watch?v=nVHy-ITYmWU&feature=player_embedded

any of you are using these kind of led holders, it seems the led is holding only by pressure. i've put one of these a little close of the stomp switch and keeps on falling inside if I touch it too hard with my foot, Ideas???