Topics

Building a kingslayer and I forgot to check the box next to 5n6 on mammoths page. Can I substitute a 4.7 instead? Its the closest value I have. Its location is C15. Thanks!

I spent my weekend with the R2G2 and the Zenith pedals. I always forget to order knobs....

Hi guys.

This is my very first etching job. I am super stoked with the way it came out. I just can't decide what kind of knobs to put on it.  This is my second Lowrider. This one I bought from here. I sanded down the enclosure and did the etching. Tons of work but well worth it. My first Lowrider I had sold before I could even take pictures. It was stock, no mods.  This one has the up octave mod done, but still doesn't sound right. Just a fizzy straight signal. This thing still rocks though! Let me know what you think!

So I noticed most designs don't show the led wiring, so I have done what I usually do on other builds. I wired the negative to the top middle lug 2.2k resistor on positive lead of LED wired to DC jack. The LED worked, so I stuffed it in the enclosure, powered it on and it flickered then it wouldn't come back on.  The pedal still works great. So I replaced the LED just in case I shorted it out when putting it in and got the same result. So I took out the resistor after looking at some pictures of other builds and still no LED. Can someone point me in the right direction as I have a sunking I have to put a LED in too. Thanks !!!