Topics

   Finally the dat has come, i think was a year of procastination but the Zero Point Deluxe Finally completed. Due to Quarentine in my country the post service its a mess so I had the need to recycle a box that had several holes from a past project.

   Hello guys can recomend me a good cable to run my guitar into my pedalboard and after to my amp.

  Hello Guys Anyone who can point me in the right direction about a schematic for a juction box, the guy on keyboards in my church need one for his two keys to use the same amp, not at the same time, but only change between the two keys

Thanks in advance

  Hello Guys im frustrating with my bloviator project, the main issue is that i got the same result in bypass mode and with the effect is engaged , i take several voltages with out the ic,s and the pot's at 12 o'clock. The version of the PCB is dated 06/01/11 the single side pcb.

Wall adapter voltage 9.48v

IC1

1. -0.01
2. -0.0
3. 0.01
4. 0
5. 0.02
6. 0.01
7. 0.01
8. 8.45


IC2

1. nothing
2. 0.01
3. 0.01
4. 8.45
5. 0.02
6. 0.01
7. 0.01
8. 0
9. 0
10. 0
11. 0
12. 0
13. 0
14. 0


IC3

1. 0
2. 0.01
3. 4.37
4. 0
5. 0
6. 0
7. 0
8. 0

After this read i add the ic3 for check the voltages in "vB" im using a TL072 instead the TL071 (This could be the problem?)


VB Voltage in al the points was 1.32 - 1.27

Someone can help me

Thanks in Advance

Hello guys im buliding a 5 looper for a friend but i want to put a buffer splitter , one split goes to tuner and the other can be before the first loop or after the 5th loop. and this is the question before of after, please help me.

Thanks

Hello guys this is the trouble..... I'm building a six true bypass looper for a friend and he need a stereo loop at the sixth loop , anyone knows how to split the signal to the 2 switches, mantaining the true bypass without loss signal ? Thanks in advance for your help

Where can i buy a good pair of Pt2399 i have some troubles with tayda's ones, so much motorboat noise , and im frustrated with two builds thanks fot the help

   Hello i need some help with my Pasty face Build, i buy a set of three transistor at smallbear, so the set includes a  different layout  with different values, my question is which one is correct, which layout i need to use.?

hello guys  where can i find a good source for j201 and 2n5457 i need some for my chunk chunk, cardenal tremolo and other builds.

  Hello guys anyone knows where i can find this holder for cables (The black ones). 

Project: Quasar morded for Bass (Rc Boost)


I have a problem with my pedal and I've tried potentiometer gain not respond, could you tell me where I can start to correct what may be wrong.

I'll post some Photos later.

 Hello someone know how can i check if a cap doesn´t work, when the cap is on the pcb. ?

Hello guys im thinking to buy a mammoth wah enclosure, but i read some negative feedback about those, someone has trying

  Recently I made the version of modulaterator for veroboard, I tried it with ZZPD but the LED does not blink . The modulation is heard but not flashing LED
  This is the veroboard wanted to help me find because the LED does not blink. Thanks in advance 

   Hello Madbeaners  I wOnder if its possible use the Zero Point Super DEluxe with some keys or a syntetizer, I ask this question because I read that this type of device has a high output impedance and would like to know if it is compatible. A friend wants one and would like to be sure that the pedal  serve him, HE uses a M-Audio midi controller, Reason and a M-Audio mtrack Plus. Thanks in advance.

Hello guys iWonder if i can use  ICL7660SCPA  instead  the TC1044SCPA for the Kingslayer build. Thanks in advance

  Hello guys, I'm planning to build a pedal 2 in 1, combining a marshall Bluesbreaker and the rat, what kind of enclosure recommend me for a pedal 2 in 1,  also want to include the effect order switch. Thanks in advance

  Hi guys i want to know if i can use the Modulaterator Board for the ZPDD . Im planning build the ZPDD into a 1590BB box with the add on. Thanks in advance

Hi im building a Chunk Chunk, and i need some help of how i can  measuring voltage at the drain´s of the J201´s  cause i don´t have any idea of how put the tips of the DMM (Red-Black) on the PCB to make the measure.

   If anyone can help i aprecciate alot. Thnaks in advance 

   

  Hi guys could anyone help me i want to buy a Earnie ball VP Jr but im not understand with suits me well (25k or 250k) i don't play any guitar whit active pickups and i have in mind oly use it in my pedalboard. Thnaks in adavance.