Messages

Thanks!

Hi!

Long time without saying anything. No time to make pedals.

The size of the PCB is 3,6x5,0 cm aprox

Hi!

Long time without saying anything. No time to make pedals. But I have some projects to continue...

I put the clipping section between C3 (1uF elec.) and Volume pot.

[Edwardian Script ITC]

On decal test I also used Edwardian Script ITC.

[Palace Script MT]

Thaks!

I use Palace Script MT, bolt.

Kunstler Script is a good alternative.

Hi,

now I build a Smoothie with vibe switch.

Some users add a switch to select C5 between 10nF or 100nF. But other mod. is add a switch to select the original configuration of C2 and C3 or using a 10nF and 100nF. What's de difference?

Tx!

Hi! Another build. Is a Hipster Fuzz Face.

I need to test differents transistors to find the best sound.

Only one mod: a switch to select between 2u2 or 47n input (C1) cap.

I use 10pF for C2.


The box was originally for a Zombie Chorus.


All inside!


The result!


More of the result!


Below.

1590A enclosures have something special! Thanks!

I made only one etch project and and was satisfactory. Now i plan to make a reverse etching and as you say I think the paper influences. Provably the finish of enclosure influences too. Surely a fine finish is not the best for transfer the toner to enclosure.

Gorgeous! Nice, very nice!

Is a Phase 45 into a 1590A enclousre.

I use the Soldersound design for the PCB.


After drilling the 1590A enclosure all is correct!


After painting... a decal test.


The PCB with soldered components.


Not a great job but... it works!


Starting the tetris!


Filtering cap. and diode protection.


All inside.


And the result!


Below.


With an orange...

I need to solve some noise problems (outside the box did not) but it works!

When I want to fix it I had an excessive thickness of paint with a different tone. I haven't pics, when I saw the result I removed that abort...

Another options is stripping all and start again at zero point.

Great job!

Hi,

Im doing a Zombie Chorus into a 1590A enclosure.

At the last step (put all into the enclosure) an accident was ocurred. Ontly 10cm, but the crash test was not satisfactory

I tried to fix it but it was worse. The painting continues cracked.

I open a voting thread...

a) Try to fix it again.
b) Nothing.
c) Scratch and crack elsewhere like an old/vintage pedal.

Thanks!

Nice job!

I use a Molotow Sealer Glossy spray can. 3 layers.

http://www.banzaimusic.com/Molotow-Sealer-Glossy.html