Messages

I've finished the footswitch and it works!

Thank you all.

Nice!  On my Peavey there's a sort of phantom power for the LED's but in my googling of the amp it looks like that's not available on the Supro.  The 9v battery option will be an upgrade to the real footswitch and I'd think you'd get a lot of life out of a 9v as long as you remember to turn it off.

I can confirm the Supro does not have this kind of phantom power. I have a Victory Super Duchess with a footswitch for the Reverb and Tremolo with leds, the switch works on the Supro but not the leds.

Yesterday I solder everything, today I'm getting a stereo jack and I'll be able to test it.

Thank you guys again! this forum's community is amazing.

A appreciate the help. Thank you both.

I'm going to try it right away!

HI guys!

I've looked for in the forum and haven't find anything besides the 3PDT guide to understand how it works these switches.

I want to make a 2-button switch for my amp (Supro Delta King 12, with boost and Drive) and I just need to connect 2 3PDT switches to a stereo jack ( thinking about adding a led for each switch) but I can't figure it out how the wiring should be. All the information I find is related to a pcb and 2 (jacks in and out) so I cannot just copy and wiring as the pictures.

Can somebody give a hand here please?
I have attached a picture of what I have.

Thanks in advance.

Thank you! I'm almost done shopping xD (almost 5h)

Ok, I found them 1/4w instead of 1/8w... I guess that'll do.

Hi guys!

I'm building the imp2, but I can't find the correct value resistors. In specific these two:
392k         1         Metal / Carbon Film         1/8W
422k         1         Metal / Carbon Film         1/8W

In Tayda jumps from 390k to 430k and that also happens in Mouser. I believe if I use a 2k with the 390k, and a 390k, 10k, 22k I can get them, but there's not much room in the enclosure, so I was wondering if I could use a bigger one in order to be able to fit everything in it.

Thanks for you help!

Update - all the Violenzz PCBs are claimed. All orders placed up to the time of this post will get one (7pm CST).
Another successful release! Whee.

I did no see this threat, just got my order from Nov28th of the Headtrip2, The Imp2 and the Kezuroukai hoping to get the Violenzz... 

Thank you!!

I promise to send pictures and maybe some video link with the results!!

Thanks again madbean!

I'm with the pots now and not sure if I have to pick linear, audio or reverse audio type, and also whats the difference between 100kC, 100kB, 100kA.

Sorry, so many questions...

Many thanks!

Thanks for the quick reply Madbean.

Would be ok one of these?

https://www.mouser.es/ProductDetail/KEMET/MMK5102J100J01L4BULK?qs=IKDMbYZLynBDiE6%252BV602cg%3D%3D

https://www.mouser.es/ProductDetail/KEMET/SMR5102K100J01L4BULK?qs=9OvERMBOKbYh9yLW7hTkLw%3D%3D

Thanks again.

Hi guys!

I'm building my first 2 projects, the Expandora and the Turnabout and both projects need a 1n cap that looks like the picture attached. I can't find this cap anywhere. Do you know any alternative for it?

Thanks a lot!