News:

Forum may be experiencing issues.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Marcelo

#1
Open Discussion / Octron
August 19, 2012, 09:11:39 PM
Hi, anyone with information on the Foxrox octron or octron 2?
I'd like to takle this one but cannot find any info about these.
M
#2
Mods / Re: My Weird Weener...
June 21, 2012, 03:17:09 AM
Thanks! I used a whipple inductor (dandyjob.com) but kept the original pot of the crybaby  (hot potz II) since it was working fine. I may consider experimenting with a different pot but not for now. Very happy with the new toy as is!
M
#3
Mods / My Weird Weener...
June 17, 2012, 08:18:24 PM
Ok, for those that like to like to constantly like to make changes to the pedalboard, I found that adding more controls to my wah allows me to make slight adjustmentsand nail the 'magic' sound without the need of opening up the pedal. So here are the mods I introduced to my wiener:
Changed C1 to 0.01n
Changed C3 to 0.33n
Changed C5 to 0.022n
Changed C6 to 0.01n
These changes bring the wah to a more classic vintage tone.
Also, for the fine controls outside the shell:
Substituted R4 with a 1k pot installed outside the case to adjust gain.
Substituted R5 with a 2k pot installed outside the case with a 2k resistor in series to adjust the bass to treble transition of the wah (smoothness).
Substituted R2 with a 100k pot installed outside the case to adjust volume.
Moved the frequency trimpot outside the shell. I found this control quite useful for final fine-tuning of the wah.
The end result... I love it! With this controls outside the case I can quickly make the desired adjustments to the wah when I change the pedalboard. Also, I love being able to adjust the gain with just a quick twist of a nob.
I used an old crybaby case and mounted two pots on each side of the case towards the front of the pedal. The buffer switch is mounted towards the back of the pedal but I keep it on most of the time.
Another tweaks..true bypass switch and on/off LED.
Hope this helps!
m

some pics: https://www.dropbox.com/sh/5biif9ioiuj3qoy/TwXasae7AF
#4
General Questions / Re: CAE Preamps?
December 05, 2011, 01:18:00 AM
yeap! exactly what i am looking for...thanks!
#5
General Questions / Re: CAE Preamps?
December 04, 2011, 09:14:11 PM
no, i am talking about the CB1, CB2 or the Jungletone:

http://www.caesound.com/cae_prod_new.html

m
#6
General Questions / CAE Preamps?
December 04, 2011, 05:10:08 PM
Hi! I'd like to start experimenting with preamps. I tried a Strat with a Clapton boost and it gives you a nice range of tone. I never tried the CAE but I heard they are very good. However...I cannot find any info about schematics. Anybody has any info on these? Thanks! m
#7
Requests / Re: More Sunkings.
November 11, 2011, 06:21:34 PM
one more time please! let us enjoy this seet tone one more time!
#8
Build Reports / Re: Sunking Vs. Klon Report
November 11, 2011, 04:34:29 AM
Quote from: G.G. on November 10, 2011, 10:09:56 PM
Marcelo, what diodes did you end up going with?
Bat 41s for D1 & D2. No other changes on any components listed in the original build. The only mod I introduced is true bypass.
#9
Build Reports / Re: Sunking Vs. Klon Report
November 10, 2011, 08:34:03 PM
Make sure you use good quality components. I used panas caps, 1% resistors, etc. I have tons of brand pedals (yes, I have GAS), some high ends, vintages, and tons of DIY. If your sound is fat, bottom end type (Warren Haynes-mule), this is by far the best pedal you can build. You will not be disappointed!
#10
Build Reports / Sunking Vs. Klon Report
November 10, 2011, 04:06:34 PM
Hi There,
Yesterday I had the opportunity to get my hands on a real Klon (Gold Version) for a few hours. I heard many different opinions about how the sunking compares to the real thing...well, I was able to do my own comparison. I run the test with a Gibson Les Paul and a Fender American Standard, thru 4 different 100W heads: Fuchs, Marshall Silver Jubilee, Diaz and a Soldano with cabinets loaded with Celestions V30. I compared any king of combo you can think of, both clean and dirty channels on the amps and tweaking the knobs on the pedals.
After a few hours of comparing and trying to find a difference between the pedals, I concluded that the Sunking is dead on. You cannot tell the difference between the two pedals at all, at least on my build.
Thank you Brian for bringing this project to us! No point at all for spending big bucks!
Hope this help you guys!
m
#11
General Questions / Retrograde with more octave
November 05, 2011, 03:41:54 PM
Hi there! I posted this question in an old tread but nobody answer. So I am trying again. I build hate Retrograde, all is good, the fuzz part sounds great, but the octave part is a bit weak. Definitely there, but weak. I tried changing components to different values, I added a pregain to the fuzz to see if reducing the fuzz makes the octave stand out more, tried humb and single coil pickups, increase the supply voltage a bit...nothing seems to make a difference. I seach the net for comments/suggestions but nothng.
any tricks to increase the sound of the octave part of hate circuit? Thanks! m
#12
Thank you guys for the responses and advise. Jacob got it right! I use a small solid state amp (microcube by Roland) to test my builds. There is no difference whatsoever on the sound when messing with the switch/knob. I check, recheck, change components, nothing. But since I love the sound of the pedal and the rest of switches/knobs woks perfectly, I gave up on this one and mounted in my pedalboard.
I play Through 4-100W amps: Soldano, Fuchs, Marshall Silver Jub and  Diaz. Guess what? the switch and the knob works great with he tube amps! not a tremendous different in sounds but definitely it's there, in particular cranking the amps up. Great pedal! Highly recommended. I hope Brian brings it back!
So...thank you guys for the advise and help! m
#13
Tech Help - Projects Page / Zygote B/M & Tweak Control
October 31, 2011, 02:19:15 AM
Hi there,

I finished my Zygote...sounds amazing! I love it. All seems to be working fine, but I cannot notice any differences when I flip the B/M switch and/or when messing with the tweak pot. I check the components associated with this part of the circuit, test the pot, change the resistors, change the pot, but nothing seems to make a difference. Looking at this circuit, it looks like this part is very simple, just adding more resistance to the circuit.
Any suggestions? anybody having the same issue? I am giving up on this one....
Thanks!
m
#14
Requests / Re: Sub-mini tube amps
October 08, 2011, 04:31:45 PM
hey rasta_maleek, nice! very nice!
you shoudl share the schematics and info! maybe that would get us all going and get the project off the ground.
did i say nice...very nice?
m
#15
Mods / Re: Retrograde Mod - increase octave up?
October 08, 2011, 03:19:30 PM
same question here. i'd like to increase the sound of the octave. any suggestions? thanks!