Messages

The laserwolf.  It will be my second build ever (my first being the Chunk Chunk).  Like I said in an older post, I'm going into this hobby 2 fistin' and swinging!!!

Bitchin' build Mike.  Tight and clean. Love the LED as well.  I personally think the half melted cap on the switch pad gives it some character. lol

This is racking my brain. I'm short 2 damn parts for this build. The J112 and the LM78L05.  I was hoping I was only short one.

Here is what I got. I hooked up a 9v source to one of my L78L05 and with the flat side facing you, the pin on the right I used for 9V+ in and the center pin as 9V- and I got a reading of 4.81v for the left pin.  Does this sound correct?  Could someone please test a LM78L05(I don't have one) and let me know if you get the same thing for the same pin configuration?

I don't know who made them.  There from Tayda.  They have L78L05  CE 144   and some wierd looking symbol in the upper left corner.

No need to apologize jimilee I wasn't thinking that at all.  I was just as confused as I could be with this pinout situation.  I'm thinking I could just rotate the L78L05 and it should work in place of the LM78L05.  What do you all think?

I checked the data sheets and the pinouts are the same for both.

No I mean LM78L05 and a L78L05. only the "M" is not present on the ones I have.  I also have a couple L7805CV ones too.

I have a few L78L05 regulators and my project calls for an LM78L05.  Can anyone tell me the difference if there is any?

Nursing a rum 'n' coke as we speak!

Thanks everyone

Heres another pic

Though it's not completely finished(ie. paint and decal), this is my first diy pedal build.  I chose to do my rite of passage with project #1, a chunk chunk I named "The Truffle Shuffle". You Goonies out there get it! First and foremost I must thank icecycle66 for donating the 25k pot I needed, and a big big shout out to my bud from the 'burgh Billy (wgc) for the very generous pif I received.  Stock chunk build, nothing special except that trimmer 1 is backed way down to tame this beast. I decided to dry the diy route because there is really nothing on the mass market that I like, and if there was, it is way too expensive.  So I'll try to make them myself.  I have already built a Marshall 1987 model 50watt plexi and homemade Strat.  Thanks fellow madbeaners for welcoming me in.
Peace
Keith

Want to build the pork barrel chorus for my bass player.  How would I modify it for bass?

Thank you