News:

Forum may be experiencing issues.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - aziltz

#1
Hi All,

I sell a few PCB projects through my commercial website, as well as post tech-related blog articles. Check them out here.  Cheers!

Austin
#2
i'm a physicist, about 6months away from my PhD.  You get a lot of experience with electronics working in experimental physics.
#3
Hey Brian,

It would be best to put a volume knob on the output.  Out from PCB to lug 3 of volume pot.  Lug 1 to ground and Lug 2 would go to the output jack hot.

For any other specific questions, feel free to contact me directly at sales@coldcrafteffects.net

Austin

edit: just noticed you are talking about the EB volume pedal.  I would separate the connection from the input jack to lug 3, and put the buffer in there, between input jack and pot.
#4
here's an example of their old-style screening.  I had my screen made just before they announced the new printer.

#5
Open Discussion / Re: Pedal Parts Plus Colors
May 21, 2013, 02:07:35 AM
Galaxy Purple with Black Silkscreen (hand-screened, not machine printed)

#6
 I hope it gets resolved.
#7
pictures?  I just had traditional screening done by them, and was thinking of sending some unprinted boxes back for machine-printing.
#8
the new Mojohand Rook Royale doesn't seem to have problems with the printing coming off.
#9
Open Discussion / Re: Zero Point Breakout Board
April 27, 2013, 02:50:41 AM
I got myself a few of those switches off mouser.  do you know of a eagle component that matches it?
#10
if ya'll are interested in my wares, this is up for grabs before its even been released. 

http://www.ebay.com/itm/Coldcraft-Effects-Cascade-MKII-002-Circuits-Cure-Cancer-/281094048120
#11
i'll be donating something for sure.  not sure what yet, hope to figure it out tonight.
#12
a month after I paid for my first screen!
#13
Open Discussion / Re: Zero Point Breakout Board
March 19, 2013, 06:29:32 PM
great thanks for the 'splaining and the link.
#14
Open Discussion / Zero Point Breakout Board
March 19, 2013, 04:11:08 PM
Brian, could you share how you created the breakout board for the ZPSDX and anything you would do differently in the future?

Thanks,
#15
Open Discussion / Bulk-ish Solder
March 03, 2013, 01:48:55 PM
Hey Y'all, I need a US source for solder in packaging larger than Radioschack.  I prefer Silver Bearing 62/36/2, but if you have other suggestions, I am open to it.  Where do you get yours?