Quote from: AntKnee on February 12, 2017, 01:46:58 AMThanks a million. Somehow I missed that feature when I looked at the JMK offerings.
JMK Hamlet+
I would like to know if the Timelapse will have subdivisions; since analog does have an appeal.
- Welcome to madbeanpedals::forum.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
#31
Open Discussion / Re: Wanting to make a tap delay pedal with subdivisions
February 12, 2017, 03:43:40 AMI would like to know if the Timelapse will have subdivisions; since analog does have an appeal.
#32
Open Discussion / Wanting to make a tap delay pedal with subdivisions
February 12, 2017, 12:53:33 AM
I would like to build a delay pedal with tap ability (thinking taptation) but with 1/4, 1/8, and dotted 8th divisions. Are there any out there?
-Sarde
-Sarde
#33
How Do I? Beginner's Paradise. / Re: Top Mounted Jacks
January 03, 2017, 05:58:09 AM
I used the general guitar gadgets template to do two top mounted enclosures tonight (1776 reverb and an aion aurora). it worked well; although I did move the power jack up a little (it looked a little too close to the edge.)
There is so much space with a 125b already (especially if you forgo the 9v battery) that moving the pcb down to give extra clearance is easily doable...provided the pots are still high enough to not get in the way. My claim to fame is that I fit a standard switchcraft jack over a dual gang pot in a 125b with no issues (no template on that one, just a lot of measuring and praying).
There is so much space with a 125b already (especially if you forgo the 9v battery) that moving the pcb down to give extra clearance is easily doable...provided the pots are still high enough to not get in the way. My claim to fame is that I fit a standard switchcraft jack over a dual gang pot in a 125b with no issues (no template on that one, just a lot of measuring and praying).