Messages

thanks alot. I'll try this.

so you had to build a new back cover??  what's the final measure?

is there any real diference 18v or 9v? if it so,  could you explain?.

is there any real diference 18v or 9v? if it so,  could you explain?.

wow it look great. I'm interested on build this unit, but  first I'd like to know if I can replace the LT1054 for a MAX1044 with no further problems?

what improvements does the KingSlayer bring? I mean  It's not a Klone But it's obviously based on it, isn't it?

this is the second time I build this pedal, the first time I used  a pcd from another webpage and it worked great, but then iI try to make it and don´t know why it did work, finally, tryed this layout and bang!!!, it sound again, I changed the transistor, don't remeber  which I used but i´ll check  and post.

ammm and made the three pots version.

so here it is

i just finsh  my pedal, i have chosen tl082, to me it works good, but now i wanna know if i can  conect it to 18v???  without problems 'course.

i just  finish my trem but Ive got a rpoble qith the pulse pot when i turn allthe way up it speed up  the signal (normal)  but when i turn all the way  down it speed up the signal to.., also i think it needs a bit more speed.

just google it....  basicaly is an octave fuzz based on Foxx Tone Machine.

ok guys, this is my  clone i did with madbeans PCB but made some changes to made a Ultimate octave, also y did some test with Fat/Bright switch caps.

i made one too,  but change some caps in tone control.

i've made it to but  got a problem with the octave switch, wen i turn it on  de efects stops the sound for a half of a second.  any of u have the same problem??   i made it with a toggle switch and then changed it for a stomp switch  but the problem keep bodering me..

please some help to fix it??

as soon as i can i'll upload som pics of mine.


Ps. excuse my poor English.