Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - marauder

Pages: [1] 2 3 ... 12
Build Reports / Re: A rarity, new build!
« on: February 16, 2021, 02:18:21 PM »
I couldn't get the transformers for a sensible price in the UK, but Phil, who I made them for lives in the US, and they were affordable, he sent them over.  I'll be sending back to him too, he won't be back over here for a while yet.

Build Reports / A rarity, new build!
« on: February 16, 2021, 11:11:00 AM »
3 in fact.  Passive DI boxes, made for a friend who still manages to persuade me or Juansolo to make him interesting things.
He was getting all 3, but to test I had to get my cousin's Fender monitor/PA thing out of my garage, and restore it a little, its been there 6 years.  After that work, I'm keeping one, and it sounds great with bass into the mic input.

This was the last of the envirotex, and the resin was starting to go off, tiny crystals were appearing in the resin, luckily didnt affect the finish too much.  Juansolo did the decal.

Here's a video, not mine.

Build Reports / Well, this was unexpected, a new build
« on: May 13, 2020, 10:43:51 AM »
It's kind of a pedal.  The filter from a 70s Wasp synth for a mate bored during lockdown.
Having not made anything myself or with Juansolo in over a year, the stash of parts was lacking, but had just enough to build it.
Only needed an enclosure and some Vero. 
Envirotex was minimal too, so improvised with a tiny amount, with plain paper, another tiny amount, sanding after a few days, and then, a flash over with some clear lacquer.
I'm actually suprised it came out as well as it did.
Juansolo did the minimal decal in 10 minutes and emailed it.

It's coming back for a volume boost mod, but its actually really good.

Build Reports / Re: Obsessive Tone Master
« on: September 11, 2016, 04:21:10 AM »
As clean a job as it gets. Superb!

Grey jacks? that's a new one to me.

Neutrik NYS229 jacks now have grey micas not yellow, slightly thinner too.   Been like it for a year or so.

Open Discussion / Re: AmpTweaker Tight Metal
« on: April 19, 2016, 08:35:37 AM »
I've got the schematic for that one, PM me your email address

Open Discussion / Re: Phase 90s, always noisy using feedback resistors
« on: January 22, 2016, 04:08:16 AM »
Not actually true. Phil's was a block casing with script internals (no feedback) and sounded like the ones we build without it.

Forgot about that one, the trimpot had turned to dust in it.

Open Discussion / Phase 90s, always noisy using feedback resistors
« on: January 21, 2016, 11:38:01 AM »
Is this normal?

Every time either me or John build a Phase 90, and put the 22k feedback resistor in, it always noisy and pretty much unusable.  Take it out, so it V1 script spec and its perfect. 

Doesn't matter who's PCB we use the result is the same.

Is this normal, I've never used a real Phase 90.

Build Reports / Re: Whiskey River: STM800
« on: February 03, 2015, 04:05:50 PM »
That's awesome.  Looking forward to seeing lots of these in the coming months.
There's two of the protos here, but with different circuits on them.  Should get them boxed up really.

Build Reports / HM-2 and Moodring, boxed up finally!
« on: January 31, 2015, 03:54:54 AM »
As usual the PCBs have been built a couple of months, and left lying in a box.

Juansolo did the pot wiring on the HM-2 to get it to fit in the 1590B.

Tech Help - Projects Page / Re: Brand new icar wah pot very noisey :(
« on: November 25, 2014, 03:46:06 PM »
Faulty 220nf caps connected to the pot can leak dc, sounds like a scratchy pot.
I swapped a pot when it was the caps.

Open Discussion / Re: NGD
« on: November 20, 2014, 01:47:19 PM »
Absolutely awesome.

Is that Korina?  Good quality Korina is getting harder to find and is quite expensive.  Still, a Korina V is the way to go if possible.

It's Korina.

Open Discussion / Re: NGD
« on: November 20, 2014, 01:45:30 PM »
I've got a Supersonic 70 pickup, the early name for the Transonic, they decided to change the name in case Fender didn't like it.
It's amazing, like a 1970s Dimarzio Super Distortion, not the noisy, higher output ones made by Dimarzio these days.
In fact, this new V has thrown a spanner in the works.  The pickups in my Edwards V, including the Supersonic where going to be transplanted into the Feline, and the BKP VH2s into the Edwards V, for me to sell it.  However, the VH2s sound so good in the Feline, they aint going anywhere.  And I'm not going to sell the Edwards with the Supersonic, so I've got to get a Dimarzio, or Seymour or something similar to put in the Edwards for sale, as cheap as possible, too.

I've got another Feline.

A funny coincidence with both these guitars is that Thorpy on the BYOC forum has owned both, in fact, the purple one was a custom build for him, and he somehow persuaded Jonathan to part with his own personal build, the V.

Open Discussion / NGD
« on: November 20, 2014, 05:01:47 AM »
Jonathan at Feline guitars, old Feline V70. 

Amazing in every way.

I forgot to post this, which I've had a month or so.
Great fun, especially with a EHX Clone Theory Chorus.
Had to swap the bridge for a Staytrem, the stock one ain't brilliant, and the nasty almost translucent pickup covers.  Surprisingly, the pickups themselves are fine.
Could do with heavier strings too, but that can wait.

Open Discussion / Re: NRNIBPD!
« on: August 12, 2014, 07:52:06 AM »
The auction never mentioned how old it was.

Open Discussion / Re: I really enjoyed discovering this pedal :D
« on: July 28, 2014, 02:51:31 AM »
Definitely an Uglyface, with different vactrol, LDR/LED combo.

Get a Machette from Rej.

Pages: [1] 2 3 ... 12